The Tektronix THS 710/720 manual provides detailed instructions on setting up and operating the oscilloscope, including using the menu system to select functions, adjusting settings, and confirming choices. It also covers troubleshooting techniques such as using the Data Logger, adjusting trigger levels, and performing automated measurements to ensure accurate readings.
Overview
The source provides information on the operation of a device with features such as automated measurements, data logging, and menu navigation. It includes instructions for using various modes like Fig Scope Mode, Meter Mode, and DMM (Digital Multimeter) functions. The manual covers how to access and use different menus, set numerical values, and perform specific functions like triggering, acquisition, and hard copy printing.
Specifications
- 118.6 VAC DMM reading
- Freq Automated
- 26.76 MHz measurements
- Oscilloscope waveform
- DMM reading —> 18.6 Vac
Controls & Indicators
The front-panel controls include buttons for various functions such as ACQUIRE, AUTORANGE, CH 1 and CH 2, CLEAR MENU, CURSOR, DISPLAY, HARD COPY, HOLD, and HORIZONTAL MENU. These buttons are used to display menus, select channels, clear menus, initiate hard copies, and control oscilloscope and meter functions.
Installation / Setup
Refer to the PDF for details.
Operation
The manual describes several basic usage steps for operating the device:
1. Menu Navigation:
– Press a front-panel button to display a menu.
– Use a bezel button to choose a menu item. If a pop-up menu appears, continue pressing the bezel button to select an item.
– Certain menu choices require setting a numerical value using the +/- rocker.
– Press the OK bezel button to confirm choices when displayed.
2. Acquisition Mode:
– Press the ACQUIRE button.
– Choose an acquisition mode.
– Press CLEAR MENU to remove menus.
3. DMM and Data Logger:
– Choose a DMM function.
– Press AUTORANGE or set a specific range.
– Set the Data Logger rate.
4. Trigger Type:
– Press the TRIGGER MENU button.
– Choose a trigger type.
– Adjust the TRIGGER LEVEL.
5. Automated Measurements:
– Press the MEAS button.
– Choose from the pop-up menu.
– Press OK.
6. Cursors:
– Press the CURSOR button.
– Choose a cursor function.
– Use the +/- rocker to adjust and the TOGGLE button to choose the active cursor.
7. Hard Copy:
– Press the UTILITY button.
– Choose Hard Copy from the System pop-up menu.
– Select a printer format and press OK. When ready, press HARD COPY to print.
8. Front-Panel Buttons:
– Various buttons are available for functions like ACQUIRE, AUTORANGE, CH 1 and CH 2, CLEAR MENU, CURSOR, DISPLAY, HARD COPY, HOLD, and HORIZONTAL MENU. Each button displays or selects specific functions or menus.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
Refer to the PDF for details.
Download MANUAL Manual (PDF – 112.3 KB)
Tektronix THS 710/720 Manual: A guide for technicians on troubleshooting and calibrating Tektronix THS 710 and 720 models.
- Brand: Tektronix-ths-710-720-reference
- Model: MANUAL
- Type: Manual
- File size: 112.3 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…