Overview
The product is the Wavetek 2020 and 2030 Autoranging Digital Multimeters. The manual covers safety information, instrument familiarization, measurement procedures, menu functions, specifications, maintenance, and repair.
Specifications
Refer to the PDF for details.
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
This instrument is IEC1010-1 certified for Installation Category III, recommended for use in distribution level and fixed installations, not for primary supply lines, overhead lines, and cable systems. All inputs are protected against continuous overload conditions up to the limits of each function’s stated input protection. Never exceed these limits or the ratings marked on the instrument. Voltages applied to the COM terminal may be present at all other terminals. Exercise extreme caution when measuring voltage >20V, current >10mA, AC power line with inductive loads, or during electrical storms. High voltages can be lethal, and high voltage transients may occur at any time. Operator injury or damage to the multimeter may occur during current measurements if the fuse blows in a circuit with open circuit voltage >600V (250 V in mA input). Always inspect your DMM, test leads, and accessories for damage or abnormality before use. If any abnormal condition exists, do not use. When testing for voltage or current, ensure these ranges function correctly by taking a reading of a known voltage or current first. Never ground yourself when taking measurements. Do not touch exposed metal pipes, outlets, fixtures, etc., which might be at ground potential. Keep your body isolated from ground and never touch exposed wiring, connections, test probe tips, or any live circuit conductors. Always measure current in series with the load — NEVER connect the multimeter ACROSS a voltage source. Check fuse first. Never replace a fuse with one of a different rating. Do not operate the instrument in an explosive atmosphere (flammable gases, fumes, vapor, dust). Do not use this or any piece of test equipment without proper training. CRT SERVICE SAFETY REMINDER: A potential danger exists when measuring voltages in the horizontal output and damper stages of CRT equipment (high voltage transients greater than 6,000 V). Refer to your CRT service manual for proper servicing instructions.
Download MANUAL Operation manual (PDF – 435.8 KB)
Operation manual for Wavetek 2020/2030 digital multimeters; guides technicians in troubleshooting and calibrating. File size: 435.8 KB.
- Brand: Wavetek-model-2020-2030-autoranging-digital-multimeters-operation
- Model: MANUAL
- Type: Operation manual
- File size: 435.8 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download MANUAL operation manual (PDF)