Heathkit HP-23B AC Power Supply Manual Schematics (PDF)

The Heathkit HP-23B AC Power Supply manual provides detailed instructions for setup, operation, and troubleshooting, including guidance on connecting the power supply to equipment, selecting voltage settings, and performing initial resistance checks to ensure proper functionality. It also emphasizes safety precautions, such as discharging capacitors before maintenance and avoiding electrical shock by working with one hand behind the back and standing on insulating material.

  • Brand: Heathkit
  • Model: HP-23B
  • Type: manual
  • File size: 2.7 MB

Manual Overview

The Heathkit HP-23B AC Power Supply manual provides detailed guidance on troubleshooting, diagnostics, and adjustments for technicians. The power supply is designed to deliver various operating voltages necessary for Heathkit amateur radio transceivers and other amateur radio equipment. It features a high voltage source, two low voltage sources, a fixed bias source, and a 12.6-volt filament source, with extensive filtering and regulation.

For troubleshooting, the manual emphasizes the importance of initial resistance checks using a vacuum tube voltmeter or volt-ohmmeter to avoid damage. It provides specific resistance values for different socket lugs and advises on the correct polarity of meter leads due to the presence of diodes in the circuit. Calibration involves setting the ohmmeter to appropriate ranges and ensuring correct readings before proceeding.

The manual also includes safety precautions, such as discharging capacitors before maintenance and working with one hand behind the back to prevent electrical shock. Technicians are advised to follow the pictorial guides for assembly and connection procedures, ensuring the power supply is correctly wired for either 120 Vac or 240 Vac operation.

Quick Issues Covered

  • Diagnose power-up failures with resistance checks before activation.
  • Calibrate low B+ voltage using the toggle switch.
  • Trace circuits using schematic for voltage doubler operation.

Overview

The Heathkit Model HP-23B AC Power Supply is designed to provide the necessary operating voltages for fixed station operation of Heathkit amateur radio transceivers. It features a high voltage source, two low voltage sources, a fixed bias source, and a 12.6 volt filament source, making it versatile for use with various amateur radio equipment. The power supply includes a toggle switch for selecting low B+ voltage and turning off the unit, a circuit breaker for overload protection, and a dual primary winding for operation from 120 or 240 Vac power lines. The manual covers unpacking, parts identification, tools, wiring, soldering, and assembly procedures.

Specifications

  • AC Power Supply Model: HP-23B
  • Toggle switch for low B+ voltage selection
  • Circuit breaker for overload and short circuit protection
  • High voltage source
  • Choice of two low voltage sources
  • Fixed bias source
  • 12.6 volt filament source
  • Extensive filtering and good regulation for dc sources
  • Dual primary winding for 120 or 240 Vac operation
  • Series connection for remote on/off control
  • High voltage winding: approximately 282 volts ac
  • Full-wave voltage doubler rectifying circuit
  • Low voltage winding with 95 or 125 volts ac
  • Half-wave voltage-doubler rectifying circuit
  • Bias voltage: about 95 volts ac, -130 volts fixed bias
  • 12.6 volt filament winding

Controls & Indicators

The front-panel controls of the Heathkit Model HP-23B AC Power Supply include a toggle switch used to select the value of low B+ voltage available at the output socket and to turn off the power supply.

Installation / Setup

The Heathkit Model HP-23B AC Power Supply requires specific setup procedures to ensure proper operation. The power supply features a dual primary winding transformer that can be configured for either 120 Vac or 240 Vac operation. Before turning on the power supply, it is crucial to conduct resistance checks using a vacuum tube voltmeter (VTVM) or a volt-ohmmeter (VOM) to avoid potential damage. The setup involves verifying the resistance at various socket lugs and ensuring the correct polarity of ohmmeter leads. Additionally, the power supply should not be turned on until the appropriate connector for the equipment has been installed. Safety precautions include allowing time for capacitors to discharge and avoiding contact with hazardous voltage areas.

Operation

The Heathkit Model HP-23B AC Power Supply is designed for use with Heathkit amateur radio transceivers and other amateur radio equipment. It provides various output voltages, including high voltage, two low voltage sources, a fixed bias source, and a 12.6-volt filament source. The power supply can be operated from either 120 or 240 Vac power lines, thanks to its dual primary winding. A toggle switch on the power supply allows users to select the low B+ voltage and turn off the power supply. The power supply features a circuit breaker for overload and short circuit protection. Output voltage connections are made through a power output socket, facilitating easy switching between mobile and fixed station operations.

Before turning on the power supply, initial resistance checks should be performed using an ohmmeter to avoid damage. The output voltage can be lethal, and precautions should be taken to ensure safety, such as allowing capacitors to discharge and avoiding work on the power supply with the line cord connected. The power supply is turned on by connecting the power cable to the equipment and plugging the line cord into an electrical outlet. The desired low B+ voltage is selected using the AC OFF switch, which also turns on the power supply if remote control is not available.

Safety & Warnings

The output voltage of the Power Supply can be lethal, and the potential stored in the large capacitors is dangerous. Allow time for these capacitors to discharge through the bleeder resistors before working on the Power Supply. The capacitors can be discharged more quickly by shorting the capacitor lugs to the chassis with a screwdriver blade. In a situation where electrical shock is a possibility, stand on some dry insulating material and work with one hand behind your back. Never attempt to do any work on the Power Supply with the line cord connected to an ac outlet.

Download PDF (2.7 MB)

Leave a Comment