Heathkit HD-1250 Solid State Dipmeter Schematics (PDF)

The manual for the Heathkit Solid-State Dip Meter Model HD-1250 provides detailed instructions on setting up and operating the device, including information on the placement of parts on the chassis and circuit boards. It also includes troubleshooting guidance, such as identifying symbols for chassis ground, circuit board ground, and external connections, as well as the specifications for resistors and capacitors.

  • Brand: Heathkit
  • Model: HD-1250
  • Type: manual
  • File size: 681.3 KB

Manual Overview

The Heathkit SCHEMATICS manual for the Solid-State Dip Meter Model HD-1250 provides detailed guidance on troubleshooting, diagnostics, and calibration. It includes a schematic diagram of the device, highlighting the oscillator and detector circuit boards. Troubleshooting involves checking connections and component values, with all resistors specified as 1/4-watt, 5% tolerance, and capacitors marked in microfarads or picofarads. Error diagnostics are facilitated by understanding the symbols used: chassis ground, circuit board ground, external connections, and positive DC voltage points. Calibration and adjustments require verifying the correct operation of the oscillator circuit, ensuring no coil is present when measuring DC voltage. Board-level guidance is provided by categorizing parts based on their mounting location, either on the chassis, oscillator circuit board, or detector circuit board. This structured approach aids technicians in systematically identifying and resolving issues within the device.

Quick Issues Covered

  • Diagnose power-up failures in Heathkit HD-1250 DIP Meter.
  • Calibrate oscillator circuit for accurate frequency readings.
  • Trace circuits using detailed schematics for troubleshooting.

Specifications

  • Li-L7
  • 10K
  • 4700
  • 27 001
  • 9VOLT
  • 1/4-WATT, 5% TOLERANCE
  • 3.2-6.6MHz
  • 6.3-13MHz
  • 2.5-26MHz
  • 25-51MHz
  • 100-250MHz

Download PDF (681.3 KB)

Leave a Comment