The Heathkit Crystal Calibrator Model HD-20 manual provides detailed instructions for assembling, operating, and troubleshooting the device, which is used for accurate signal generation at 100 kHz intervals up to 54 MHz. It includes guidance on proper soldering techniques, component identification, and setup procedures to ensure the calibrator functions reliably and maintains battery life.
Manual Overview
The Heathkit HD-20 Crystal Calibrator manual provides detailed guidance on assembling and operating the device, which serves as an accurate signal source for amateur radio operators. The manual emphasizes the importance of careful assembly and proper soldering techniques to ensure reliable operation. Troubleshooting involves checking connections and ensuring components are correctly placed according to the schematic diagram. The HD-20 operates as a transistorized crystal-controlled oscillator, with a 100 ke tank circuit that can be adjusted for maximum output signal. Calibration involves using the parallel combination of a 10 pF capacitor and an 8-50 pF trimmer to fine-tune the oscillator frequency to exactly 100 ke. The manual advises users to turn on the device only when in use to conserve battery life. For maintenance, users are encouraged to retain the manual for reference and to carefully check parts against the list provided to identify any shortages or damages. Proper soldering is crucial, with specific instructions on how to achieve clean, reliable joints to avoid malfunction.
Quick Issues Covered
- Diagnose power-up failures due to battery or switch issues.
- Calibrate oscillator frequency using 10 pF capacitor and trimmer.
- Trace circuit faults using schematic for HD-20 crystal calibrator.
Overview
The Heathkit Model HD-20 Crystal Calibrator is an accurate signal source designed for amateur radio operators. It provides output signals at 100 kHz intervals up to 54 megacycles and can be used for receiver dial calibration, checking band limits, and receiver RF alignment. The device employs a transistorized crystal-controlled oscillator and operates using a 9-volt battery. The manual includes assembly instructions, circuit descriptions, and soldering techniques to assist users in building and maintaining the calibrator.
Specifications
- Frequency Coverage: 100 ke to at least 54 mc, in harmonics of 100 ke.
- Crystal: Quartz, fundamental frequency.
- Frequency: 100 ke + .005%.
- Pin Spacing: .486".
- Transistor: 2n400.
- Battery Voltage: 9 volts.
- Battery Life: 6 months, normal intermittent service.
- Switch: OFF-ON
- Dimensions: 2 1/2" wide x 4 1/2" high x 2 5/8" deep (overall)
- Net Weight: 9 oz.
- Shipping Weight: 1 lb.