Heathkit AM-2 Reflected Power Meter Operation Manual Schematics (PDF)

The Heathkit Reflected Power Meter Model AM-2 manual provides instructions for setup, operation, and troubleshooting of the device, which is designed to measure and monitor reflected power and standing wave ratio (S.W.R.) in a coaxial line with 50 or 75 ohm impedance. The manual explains the circuit's operation, detailing how the device uses a "Function" switch to toggle between measuring forward and reflected power, and includes guidance on using the sensitivity control to establish reference levels for normal operation.

  • Brand: Heathkit
  • Model: AM-2
  • Type: operation manual
  • File size: 1.1 MB

Manual Overview

The Heathkit AM-2 Reflected Power Meter is designed for radio amateurs to monitor the efficiency of power transfer from a transmitter to an antenna system. It operates without external power and can handle up to one kilowatt of RF power. The device uses a transmission line with inductive and capacitive coupling to measure forward and reflected power, indicating the standing wave ratio (S.W.R.) from 1:1 to 6:1. The AM-2 features two bridges: the “Reflected” bridge, which shows zero reflected power for perfect impedance matching, and the “Forward” bridge, which indicates transmitter tuning efficiency. The meter’s sensitivity control allows users to set a reference level for normal operating conditions. While the AM-2 does not provide a direct power output scale, it serves as a reliable tool for continuous monitoring and transmitter tuning, ensuring optimal performance across various frequencies and power levels.

Quick Issues Covered

  • Diagnose power-up failures with circuit continuity checks.
  • Identify and interpret error codes for reflected power issues.
  • Use schematics for effective circuit tracing and diagnostics.

Overview

The Heathkit Model AM-2 Reflected Power Meter is designed for radio amateurs and operators of similar transmitting equipment. It provides a reliable and inexpensive means to determine the efficiency of radiofrequency power transfer from a transmitter to an antenna system. The AM-2 is capable of handling up to one kilowatt of power and can be used for measuring or monitoring reflected power or standing wave ratio (S.W.R.) in coaxial lines with 50 or 75 ohm impedance. It requires no external power source and can be permanently installed in a transmission line for continuous monitoring of transmitter tuning and impedance matching. The device features a circuit based on a design from the U.S. Naval Research Laboratory, utilizing inductors, diodes, and a metering circuit to indicate forward and reflected power. The AM-2 is compact, lightweight, and employs standard VHF coaxial connectors.

Specifications

  • R. F. Power Handling Capabilities: One kilowatt
  • Input and Output Impedance: 50 or 75 ohms
  • Power Requirements: None
  • Band Coverage: 160 through 2 meters
  • Meter: 100 microamperes, full scale
  • Indicates percentage of forward and reflected power, and standing wave ratio from 1:1 to 6:1
  • Cabinet Size: 7 3/8" x 4 1/16" x 4 5/8"
  • Net Weight: 1 1/2 pounds
  • Shipping Weight: 3 pounds

Operation

The Heathkit Model AM-2 Reflected Power Meter is designed for radio amateurs to measure and monitor reflected power and standing wave ratio (S.W.R.) in a coaxial line with 50 or 75 ohm impedance. It can handle up to one kilowatt of R.F. power and requires no external power source. The AM-2 can be permanently installed in a transmission line to continuously monitor transmitter tuning, impedance matching, and relative power output. It features a “Function” switch to select between “Forward” and “Reflected” modes, allowing users to measure forward and reflected power. The device uses a metering circuit with a sensitivity control to indicate power levels, but does not provide a direct scale for forward current due to the wide range of applicable frequencies and power levels.

Download PDF (1.1 MB)

Leave a Comment