Drake DIP42 Operation Manual (PDF)

The Drake MANUAL for the DIP42 Diplexer provides detailed instructions on setting up and operating the device, which is designed to split or combine "T" channel and TV/Cable TV channels, and includes specifications such as impedance, return loss, frequency response, and insertion loss. It also offers troubleshooting guidance by detailing the expected performance metrics like passband ripple and RF attenuation in stopbands.

  • Brand: Drake
  • Model: DIP42
  • Type: operation manual
  • File size: 19.2 KB

Manual Overview

The operation manual for the DIP42 Diplexer focuses on its function as a high-performance diplex filter designed to split or combine signals in the “T” channel (DC to 42 MHz) and TV/Cable TV channels (50 MHz to 1000 MHz). The manual emphasizes the importance of ensuring proper installation within return path systems, highlighting the device’s electrical specifications. The DIP42 features a 75 Ohm impedance with type F connectors, and it provides a return loss of over 18 dB for the return path and over 16 dB for the forward path. The frequency response is specified as DC to 42 MHz for the low port and 50 to 1000 MHz for the high port. Insertion loss is minimal, with less than 0.75 dB for the low port and less than 1 dB for the high port. The RF attenuation in stopbands is at least 50 dB, typically reaching 60 dB, with a passband ripple of ±0.25 dB. The manual does not provide specific troubleshooting flow, error codes, or board-level guidance, focusing instead on the device’s specifications and performance metrics.

Quick Issues Covered

  • Diagnose insertion loss issues in low and high passbands.
  • Identify and resolve return path return loss below 18 dB.
  • Use schematics for circuit tracing in complex installations.

Overview

The DIP42 is a high performance diplex filter designed to split or combine “T” channel (DC to 42 MHz) and TV and Cable TV channels (50 MHz to 1000 MHz). It features a 75 Ohm impedance with type F connectors and offers specific return loss and frequency response characteristics for both the return and forward paths. The product is made in Canada and is a registered trademark of the R.L. Drake Company.

Specifications

  • Impedance: 75 Ohm, type F connector.
  • Return Loss- Return Path: >18 dB.
  • Return Loss- Forward Path: >16 dB.
  • Frequency Response- Low Port: DC to 42 MHz.
  • Frequency Response- High Port: 50 to 1000 MHz.
  • Insertion Loss In Passbands- Low Port: Less than .75 dB, (DC-40 MHz).
  • Insertion Loss In Passbands- High Port: Less than 1 dB (54-1000 MHz).
  • RF Attenuation In Stopbands- Either Port: 50 dB minimum, 60 dB typical.
  • Passband Ripple: ±.25 dB.

Download PDF (19.2 KB)

Leave a Comment