Drake DC-4 Instruction Manual Schematics (PDF)

The manual for the Drake Model DC-4 Power Supply provides detailed instructions for installation, operation, and troubleshooting, including specifications for input and output voltages, as well as guidelines for proper mounting and connection to avoid damage. It also includes a spare parts list with pricing for components such as capacitors, connectors, and transformers, ensuring users can maintain and repair the power supply as needed.

  • Brand: Drake
  • Model: DC-4
  • Type: manual
  • File size: 134.5 KB

Manual Overview

The Drake DC-4 Power Supply manual provides detailed instructions for installation, troubleshooting, and maintenance of the unit. The DC-4 is designed to convert 12 Volts DC into the necessary voltages for operating Drake 4-Line Transceivers and Transmitters. It features outputs of 650 Volts DC at 300 mA and 115 Volts AC at varying amperages, depending on the configuration. Installation requires mounting the unit on the passenger side of the firewall, avoiding placement in the trunk or engine compartment unless adequately protected. The manual emphasizes the importance of using a negative ground system and warns against using positive ground systems to prevent damage. For troubleshooting, the manual suggests checking connections and ensuring proper grounding. Calibration involves adjusting the bias voltage between -45 to -65 Volts DC. The manual includes a spare parts list for board-level repairs, detailing components such as capacitors, diodes, and transformers, which are essential for maintaining the power supply’s functionality.

Quick Issues Covered

  • Diagnoses power-up failures in Drake 4-Line Transceivers.
  • Calibrates -45 to -65 Volts DC bias into 33 K Ohms.
  • Adjusts for low cold resistance loads like incandescent lamps.

Overview

The R. L. Drake Model DC-4 Power Supply is a self-contained power converter that transforms 12 Volts DC into the necessary voltage to operate Drake 4-Line Transceivers and Transmitters. It includes a receptacle supplying 115 VAC for operation of the R-4C/T-4XC or T-4C combination and is designed with a negative ground system for mobile use.

Specifications

  • Input: 12 Volts DC
  • Output: 650 Volts DC at 300 mA average (500 mA peak)
  • 250 Volts DC at 175 mA
  • -45 to -65 Volts DC adjustable bias into 33 K Ohms
  • 115 Volts AC at 600 mA for receiver operation
  • 115 Volts AC at 1.3 Amperes if used alone
  • Frequency: Approximately 330 Hertz square wave
  • Size: 8 inches long x 4.5 inches wide x 3.5 inches high
  • Weight: 7 pounds

Installation / Setup

The R. L. Drake Model DC-4 Power Supply is designed for mobile use with a negative ground system and should not be used with positive ground systems to avoid damage. It should be mounted on the passenger side of the firewall, avoiding placement in the trunk or engine compartment unless protected from water and heat. The power supply requires a 12 Volts DC input and provides multiple outputs, including 650 Volts DC at 300 mA average, 115 Volts AC for receiver operation, and adjustable bias voltage. Installation involves connecting the short black wire to a ground and the red/white wire to the battery or starter solenoid, with the fuse holder mounted near the battery. The DC-4 should be connected to the transmitter using the supplied cable assembly, with excess cable coiled and taped in place.

Safety & Warnings

The manual explicitly warns not to use the DC-4 power supply with positive ground systems as it may result in serious damage. Additionally, it advises that the DC-4 should be mounted on the passenger side of the firewall and not placed in the trunk or engine compartment unless protected from water and engine heat.

Download PDF (134.5 KB)

Leave a Comment