The manual provides detailed instructions for setting up and operating the CR-5 adapter with specific wiring schemes and pin configurations for use with B & K Precision Models 467 and 470. It also includes information on troubleshooting and maintaining an up-to-date setup chart through a subscription service offered by B & K Precision.
Manual Overview
The Bk MANUAL provides detailed instructions for troubleshooting, diagnostics, and calibration of the CR-5 adapter used with B & K Precision Models 467 and 470. The manual includes a wiring scheme for the CRT nylon socket, specifying pin color and receptacle numbers to ensure correct connections. Troubleshooting flow involves checking these connections and verifying the tube heater voltage, which is consistently 6.3 volts across various tube types. Error codes and diagnostics are not explicitly mentioned, but proper wiring and voltage checks are implied as primary diagnostic steps. Calibration and adjustments are likely related to maintaining accurate pin connections and ensuring the adapter fits the specified CRT dimensions, such as pin circle diameter and keyway measurements. Board-level guidance is minimal, focusing instead on maintaining proper electrical connections and subscribing to the B & K Precision chart mailing service for updates on new CRT types. For further assistance, contact the Factory Service Department at Maxtec International Corporation in Chicago.
Quick Issues Covered
- Diagnose power-up failures in B&K Precision Models 467, 470.
- Error codes for tube heater voltage mismatches in CRT adapters.
- Schematics for circuit tracing in CRT wiring schemes.
Specifications
- ADAPTER MODEL CR-5
- SOCKET WITH WIRES— 527-049-9-00
- NYLON RECEPTACLE PN 779-004-9-00
- PINS (SPECIFY QTY)
- FITS CRT DIMENSIONS:
- A= pin circle diameter 15.24 mm/0.600" nom.
- & = angular pin spacing 45°
- B = post diameter 11.15 mm/0.439" max.
- C = keyway width 2.36 mm/0.093" max.
- D = keyway depth 1.778 mm/0.070" max.
- Used with B & K Precision Models: 467, 470
Installation / Setup
The source provides a wiring scheme for the CR-5 adapter model, detailing the pin connections and color codes for wiring. It specifies the dimensions and angular pin spacing for fitting CRTs. Additionally, it lists compatible tube heater types and voltages. There is a recommendation to subscribe to the B & K-Precision chart mailing service for updates on CRT types.