The manual provides wiring schemes and assembly instructions for the CRT Adapter used with B & K-Precision Models 467 and 470, detailing pin configurations and color codes for proper setup. It also offers information on subscribing to a chart mailing service for updates on CRT types and troubleshooting assistance through B & K-Precision's factory service operations.
Manual Overview
The Bk MANUAL provides detailed guidance for the CRT Adapter Precision CR-2, specifically focusing on wiring schemes and compatibility with B & K-Precision models 467 and 470. The manual outlines the wiring assembly, including pin color codes and socket wire receptacles, essential for ensuring correct connections. Troubleshooting involves verifying the wiring scheme, ensuring each pin aligns with the specified color and receptacle. Error diagnostics are not explicitly detailed, but ensuring correct wiring can prevent common issues. Calibration and adjustments are implied through the correct wiring and use of compatible tube heater types, all operating at 6.3 volts. Board-level guidance is not directly addressed, but maintaining updated set-up charts is crucial for compatibility with new CRT types. For ongoing updates, technicians are advised to subscribe to the B & K-Precision chart mailing service, which provides biannual updates on CRT types. Contact information for B & K-Precision’s factory service operations is provided for further assistance.
Quick Issues Covered
- Diagnose power-up failures on B&K Precision Models 467, 470.
- Identify error codes related to CRT adapter wiring.
- Trace circuit schematics using detailed pin color coding.
Overview
The product is a CRT adapter for Precision CR-2, used with B & K-Precision Models 467 and 470. The manual covers the wiring scheme and assembly details, including pin configurations and color codes for wires. It also provides information on compatible tube types and heater voltages, and offers a subscription service for updates on CRT types.
Specifications
- CRT ADAPTER pt PRECISION CR-2
- ASSEMBLY A
- PIN COLOR
- 1 BLK
- 2 RED
- 3 WHT/RED
- 4 YEL/RED
- 5 YEL/GRN
- 6 GRN
- 7 WHT/GRN
- 8 N.C.
- 9 WHT
- 11 WHT/BLU
- 12 BLU
- 13 YEL/BLU
- A = pin circle diameter = 39.37 mm/1.550" nom.
- a = angular pin spacing = 25-5/7
- B = post diameter = 19.43 mm/0.765" max.
- C = keyway width = 9.90 mm/0.390" max.
- D = keyway depth = 0.914 mm/0.036" max.
- Used with B & K-Precision Models: 467, 470
- TUBE TYPE
- 14BCP22
- 17EJP22
- 1L7EN P22
- 19VABP22
- 19VACP22
- 20VAKP22
- 21 AXP22
- 21CYP22
- 21EP22
- 21FBP22
- 21FJP22
- 21FKP22
- 21GUP22
- 21GVP22
- 21GXP22
- 21GYP22
- 21GZP22
- 21HAP22
- 22EP22
- A00EB22
- 430CB22
- 1819P22
- 1828P22
- 1837P22
Installation / Setup
The source provides a wiring scheme for the CRT Adapter PT Precision CR-2, detailing the pin color and receptacle connections. It specifies the pin circle diameter, angular pin spacing, post diameter, keyway width, and depth. The adapter is used with B & K-Precision Models 467 and 470 and supports various tube heater types with a voltage of 6.3. Additionally, it mentions a subscription service for keeping setup charts up-to-date with new CRT types.