The ATR-2485 User Manual provides instructions for setting up the RS-232 to RS-485 adapter, including connecting it to a PC and compatible equipment, and details the specifications such as connection speed and transmission length. It also includes troubleshooting guidance for connecting multiple pieces of equipment using the RS-485 connectors.
Manual Overview
The ATR-2485 RS-232 to RS-485 Adapter manual provides guidance on connecting a PC with an RS-232 communication port to equipment with an RS-485 interface. The adapter supports a transmission length of up to 1000 meters and does not require any additional software for operation. The RS-232 side features a DB-9 female connector, while the RS-485 side utilizes a 3-pin connector with designated pins for RS-485 (+A), RS-485 (-B), and GND. The connection speed is up to 9600 bps. For troubleshooting, ensure proper connections between the PC and the equipment, and verify that the correct pins are used. The manual includes diagrams to assist with connecting multiple pieces of equipment in series. Calibration and adjustments are not specifically covered, as the device is plug-and-play. For board-level issues, ensure that the optical isolation is intact and that there are no physical damages to the connectors. Error codes and diagnostics are not detailed in the manual.
Quick Issues Covered
- Diagnose RS-485 connection issues with specific pin configurations.
- Resolve power-up failures by verifying RS-232 to RS-485 connections.
- Use schematics for circuit tracing between RS-232 and RS-485 interfaces.
Overview
The ATR-2485 is an RS-232 to RS-485 adapter designed for connecting a PC with an RS-232 communication port to RS-485 interface equipment, such as programmable power supplies. It supports transmission lengths of up to 1000 meters and does not require any driving software. The adapter features optical isolation and connects directly to a male RS-232 communication port on a PC. The RS-232 side uses a DB-9 female connector, while the RS-485 side uses a 3-pin connector. The connection speed is up to 9600 bps, and the device dimensions are 33mm x 17mm x 87mm, with a weight of 40 grams.
Specifications
- RS-232 side of the converter | DB-9 female connector
- RS-485 side of the converter | 3-pin connector – pin 2: RS-485 (+A)
- pin 3: RS-485 (-B)
- pin 4: GND
- Connection Speed | up to 9600bps
- Transmission Length | up to 1000 m
- Dimension : 33mm (W) x 17mm (H) x 87mm (D)
- Weight 40 g
Installation / Setup
The installation/setup highlights for the ATR-2485 RS-232 to RS-485 Adapter include connecting the RS-232 side of the adapter to the PC communication port and the RS-485 side to the equipment with an RS-485 interface. Only the A+, B-, and GND pins are used on the RS-485 side. The adapter does not require any driving software and can be directly connected to the male RS-232 communication port of a PC. The transmission length can be up to 1000 meters, and the connection speed is up to 9600 bps. If connecting multiple pieces of equipment, the RS-485 connector of one piece of equipment should be connected to the next in sequence.