BK Precision 4030 Instruction Manual (PDF)

The BK Precision Model 4030 10MHz Pulse Generator manual provides detailed instructions on the setup, operation, and troubleshooting of the device, including specifications, installation data, power requirements, and operating instructions for front and rear panel controls. It also covers safety precautions, cleaning guidelines, and warranty information, emphasizing that the unit contains no user-serviceable parts and should be returned to BK Precision for any repairs.

  • Brand: BK Precision
  • Model: 4030
  • Type: manual
  • File size: 246.6 KB

Manual Overview

The BK Precision Model 4030 10MHz Pulse Generator manual provides detailed guidance on troubleshooting, diagnostics, and adjustments for technicians. The manual emphasizes that the unit contains no user-serviceable parts, and any defects should be reported to BK Precision within the warranty period. For troubleshooting, the manual suggests using the pulse generator for signal substitution or signal tracing in digital logic circuits, with an oscilloscope to examine outputs. Error diagnostics are facilitated by the 4-digit display, which shows rate frequency and allows for internal, external, and auxiliary modes. Calibration and adjustments involve setting the pulse repetition rate, width, and amplitude using the front panel controls, with specific guidance on using the range select switch and controls for fine-tuning. The manual also includes board-level guidance, such as ensuring proper grounding and using the correct power fuse. Proper installation and maintenance are crucial, with instructions to keep the unit clean and free from dust, using only a soft, moist cloth for cleaning.

Quick Issues Covered

  • Diagnose power-up failures with incorrect fuse ratings.
  • Calibrate pulse width and delay settings for accuracy.
  • Trace circuits using detailed schematics for Model 4030.

Overview

BK Precision’s Model 4030 is a 10MHz Pulse Generator designed to be a handy and easy-to-operate unit. It provides a pulse repetition rate from 0.1Hz to 10MHz, with rise and fall times of less than 12 nanoseconds, pulse widths from 50 nanoseconds to 50 milliseconds, and pulse amplitudes from 0.5V to 5V across 50 ohms. The device includes features for external triggering and monopulse generation. The manual covers specifications, safety instructions, installation, operating instructions, and maintenance guidelines.

Specifications

  • FREQUENCY RANGE: Internal 0.1Hz to 10MHz in 8 decade ranges & variable.
  • Stability Internal Mode: 0.5%.
  • X'tal Spot Frequencies: 10MHz, 1MHz, 100KHz, 10KHz, 1KHz, 100Hz, 10Hz, 1Hz.
  • Stability X'tal Mode: 200 ppm.
  • Warm up Time: 30 minutes.
  • TRIGGERING: Internal, External 0.1Hz to 10MHz, 10Hz to 10MHz.
  • Manual 1 pulse out for each switch press.
  • Ext. Trig-Input: +1V to +10V p-p sine & square waveform.
  • Trig. Output: TTL pulse (Zo=50 ohms).
  • Manual trigger available for 10 MHz (100 ns) rate only. Not available with any other rate settings.
  • FREQUENCY COUNTER: Range 0.1Hz to 10MHz.
  • Display: 4 digit counter with Internal, External and Auxiliary mode.
  • Display Accuracy: ±0.5% +1 count.
  • RATE: 100nsec – 0.1sec (8 decade range & variable adj.).
  • WIDTH: 50nsec – 50msec (0 decade range and variable).
  • DELAY: 0 – 2usec variable w.r.t. trigger output.
  • OUTPUT POLARITY: Normal / inverting.
  • OUTPUT: Pulse Out 0.5V – 5V at 50 ohms.
  • Impedance: 50 ohms.
  • Rise & Fall Time: 12nsec.
  • Output Terminal: BNC connector.
  • POWER SUPPLY: Voltage 115V & 230V AC ±10%, 47Hz – 63Hz switchable.
  • Consumption: 10VA.
  • PHYSICAL: Dimensions (WxHxD) 10.8 x 3.4 x 12.2 (275 x 86 x 310 mm) approx.
  • Weight: 6.6 Ibs. (3 Kgs.) approx.

Installation / Setup

The instrument is shipped ready for bench operation, and the front panel must remain unobstructed to allow cable connections and switch/knob operation. The packing material should be retained for potential future calibration or servicing needs. The Model 4030 has a three-conductor power cord that grounds the instrument chassis when connected to a compatible power receptacle. It operates over a nominal 115V & 230V AC ±10%, 47Hz – 63Hz supply.

Safety & Warnings

Prior to applying power to the instrument, ensure that earth is available at the power outlet. Intentional interruption of the grounding system, by use of two-wire plug adapters or two-wire extension cords, must be considered an unsafe practice. Be sure that only the correct power fuse with required V/I ratings is installed for replacement purposes. Incorrect fuse rating can result in fire and/or serious damage or harm to human life and property.

Download PDF (246.6 KB)

Leave a Comment