The manual for Bk SCHEMATICS provides detailed information on the setup, operation, and troubleshooting of the B & K-PRECISION MODEL 3010, including specifics on voltages, waveforms, and component specifications. It includes a parts list with descriptions and part numbers for diodes, transistors, resistors, potentiometers, integrated circuits, capacitors, and miscellaneous components, as well as instructions for ordering replacement parts.
Manual Overview
The Bk SCHEMATICS manual provides detailed guidance for troubleshooting, diagnostics, calibration, and board-level adjustments for the B&K Precision Model 3010. The manual emphasizes the importance of observing original voltages and waveforms with the specified model, noting that all AC and DC voltages on the schematic have a tolerance of ±10%. For troubleshooting, technicians should follow the flow of the schematic, paying attention to the function generator and power supply sections. Error codes and diagnostics are not explicitly listed, but the manual suggests checking component values and connections if issues arise. Calibration involves adjusting potentiometers, which are indicated by arrows for clockwise rotation. The manual includes a comprehensive parts list for diodes, transistors, resistors, and integrated circuits, providing part numbers for replacements. Technicians are advised to use the schematic to verify component values, as standard resistors and capacitors are not listed. The manual also notes that the schematic is subject to change without notice, highlighting the need for technicians to verify the latest version when performing maintenance or repairs.
Quick Issues Covered
- Diagnose power-up failures with voltage and waveform checks.
- Identify error codes using schematic circuit tracing.
- Calibrate using potentiometer adjustments indicated in schematics.
Specifications
- +21V
- +1.25V
- 3.8V
- 12V
- 125
- 0.2ms/DIV
- 8A
- 234V
- +16V
- +5V
- 1AMP, 600 PIV, Silicon Diode
- 1N4148 Silicon Diode
- PNP Transistor
- 2N5087 PNP Silicon Transistor
- 2N5210 NPN Silicon Transistor
- Dual N-Channel FET
- 2N3904 NPN Silicon Transistor
- 2N3906 PNP Silicon Transistor
- 78L15AC, +15 Regulator
- T8LOSAC, +5 Regulator
- 324, Quad OPAMP
- 75107, Dual Line Receiver
- 7400, Quad Nand Gate
- 3086, Transistor Array
- Power Transformer, 120V,60 Hz
- Power Transformer, 120/240V, 50/60 Hz
- Fuse, 1/8A, 3AG, Slo-Blo
- Fuse, 1/16A, 3AG, Slo-Blo (240V MODEL ONLY)
- 1000uF, 25V, P.C. Aluminum Electrolytic
- .01uF, 100V, 10%, P.F. Ceramic Disc
- 470uF, 25V, P.C. Aluminum Electrolytic
- 10uF, 25V, P.F. Tantalum
- 47pF,6.3V, P.F.Tantalum
- 3.3uF, 10%, Metalized Polycarbonate
- .033uF, 10%, Polypropylene
- 25pF, 10%, 500V, P.F. Ceramic Disc
- 300pF, 10%, Polypropylene
- 20pF, 10%, S500V, P.F. Ceramic Disc