The Bk MANUAL provides detailed instructions for setting up and operating a multimeter, including specifications for various measurement ranges such as voltage, current, resistance, and capacitance. It also includes troubleshooting tips, safety precautions, and warranty information to ensure proper use and maintenance of the device.
Manual Overview
The Bk MANUAL provides detailed instructions for technicians on troubleshooting, diagnostics, calibration, and board-level guidance for a multimeter with specific features. It includes five DC voltage ranges from 200 mV to 1000 V and five AC voltage ranges from 200 mV to 750 V, with a basic accuracy of DCV + 0.5%. The device supports manual ranging for DC and AC measurements, with overload protection up to 1200 V DC and 850 V AC. The manual outlines the resolution and accuracy for each range, emphasizing the importance of proper calibration and adjustments to maintain accuracy. Error codes and diagnostics are addressed through features like auto polarity, auto zero, and overrange indication. The multimeter is equipped with a high-energy fuse for overload protection and a shock-resistant case for durability. For board-level troubleshooting, the manual provides guidance on using the hFE transistor test function and diode test function, which measure DC gain and forward voltage drop, respectively. The manual also includes specifications for resistance, capacitance, and current measurements, ensuring technicians can effectively diagnose and repair electronic components.
Quick Issues Covered
- Diagnose manual ranging issues with DC/AC voltage and current.
- Resolve power-up failures due to blown fuses or overload protection.
- Use schematics for circuit tracing and component identification.
Specifications
- Basic accuracy: DCV + 0.5%
- Resolution of 100 pV, 0.1.0, 0.1 pA.
- Single function and range control.
- Five dc voltage ranges: 200 mV to 1000 V.
- Five ac voltage ranges: 200 mV to 750 V.
- Five capacitance ranges: 2 nF to 20 pF.
- Four dc current ranges: 200 pA to 200 mA and 10 A.
- Three ac current ranges: 20 mA, 200 mA, and 10 A.
- Six resistance ranges: 200 2 to 20 MQ.
- hFE transistor test function: Measures de gain (de 8 or hFE) of PNP and NPN transistors.
- Diode test function: measures forward voltage drop.
- Audible continuity buzzer.
- 3-1/2 digit LCD display with large 0.5” characters.
- Auto polarity, auto zero.
- Overrange indication on all ranges.
- Overload protection.
- High energy fuse.
- Safety type test leads.
- Shock resistant case withstands 4-foot drop.
- Slanted display for easy viewing.
- Tilt stand. Also converts for use as hanger strap.
- Specifications apply from + 18° to + 28°C at relative humidity up to 75% unless otherwise noted.
- DC VOLTS Manual ranging
- Overvoltage Protection
- Input impedance 10 MQ
- Full range step response (to rated accuracy) 3 second max.
- Normal mode rejection Greater than 30 db (50/60 Hz)
- Common mode rejection Greater than 100 db (50/60 Hz)
- AC VOLTS Manual ranging, average responding, rms reading
- Overvoltage Protection
- Input impedance 10 MQ, less than 100 pF
- Full range step response (to rated accuracy) 8 seconds max.
- DC CURRENT Manual ranging
- Burden Voltage
- Overload protection 250 mA (250 V) fast blow fuse, plus hi-energy fuse. 10 A Not fused.
- AC CURRENT Manual ranging, average responding, rms reading
- Burden Voltage
- Overload protection 250 mA (250 V) fast blow fuse, plus hi-energy fuse. 10 A Not fused.
- Full range step response (to rated accuracy) 8 seconds max.
- RESISTANCE Manual ranging
- Overload protection 250 V DC/AC
- Full range step response (to rated accuracy)
- CAPACITANCE Manual ranging
- TRANSISTOR hFE (DC GAIN) MEASUREMENT
- Test condition Base DC current = 10 pA; Vce = 2.8 V
- CONTINUITY CHECK
- Overload Protection 250 V DC/AC
- DIODE CHECK
- Measures forward voltage drop of diode or semiconductor junction in mV.
- GENERAL SPECIFICATIONS
- Display 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999.
- Polarity Automatic, (— ) negative polarity indication.
- Overrange Indication “1” or “— 1”
- Low Battery Indication LO BAT displayed.
- Sampling Rate 2.5 measurements per second, nominal.
- Temperature
- Power Single standard 9V battery, NEDA 1604 or equivalent.
- Battery Life 200 hours typical (alkaline).
- Dimensions (H x W x D) 1-3/8” x 3-9/16" x 7-1/2” 5 mm x 90 mm