BK Precision 1804 Instruction Manual (PDF)

The B&K Precision manual provides detailed instructions for setting up and operating frequency counters, including models 1803A and 1804, with guidance on connecting power sources, selecting gate times, and applying signals for measurement. It also includes troubleshooting steps, such as checking the maintenance section for adjustments and contacting authorized service agencies if problems persist.

  • Brand: BK Precision
  • Model: 1804
  • Type: manual
  • File size: 357.3 KB

Manual Overview

The B&K Precision manual provides detailed instructions for operating and troubleshooting frequency counters, specifically models 1803A and 1804. The manual outlines the frequency characteristics, input specifications, and display features for both models. Troubleshooting involves checking the power and gate time settings, ensuring the correct input jack is used, and verifying the signal frequency range. Error diagnostics include checking the overflow indicator, which lights up when the frequency exceeds 99.999999 MHz, and monitoring the low battery indication, which causes all digits to flash if the voltage drops below 7.0 V in model 1803A. Calibration involves setting the power/gate time switch to either 0.1 or 1.0 seconds, depending on the desired resolution and update time. The manual also provides board-level guidance, including input impedance and connector types. For technical issues beyond basic troubleshooting, the manual advises contacting an authorized service agency or the factory service department for repairs.

Quick Issues Covered

  • Diagnose power-up failures with LED display indicators.
  • Identify error codes using overflow and low battery indicators.
  • Trace circuits with provided schematic diagram for troubleshooting.

Specifications

  • FREQUENCY CHARACTERISTICS
  • Range:
  • 1803A: 5 Hz to 100 MHz
  • 1804 Direct: 5 Hz to 100 MHz
  • 1804 Prescale: 10 MHz to 550 MHz
  • Accuracy: +Time base accuracy +1 count
  • Resolution:
  • 1803A: 1 Hz (1.0 Sec Gate), 10 Hz (0.1 Sec Gate)
  • 1804 Direct: Same as 1803A
  • 1804 Prescale: 10 Hz (1.0 Sec Gate), 100 Hz (0.1 Sec Gate)
  • Display: Input signal frequency; values under 1 MHz read in Hz, values over 1 MHz read in MHz
  • INPUT CHARACTERISTICS
  • Impedance:
  • 1803A: 1 MΩ resistance, shunted by 40 pF
  • 1804 Direct: Same as 1803A
  • 1804 Prescale: 50Ω
  • Connector: BNC
  • Coupling: AC
  • Sinewave Sensitivity:
  • 1803A: 30 mV rms, 5 Hz to 30 MHz; 50 mV rms, 30 MHz to 80 MHz; 100 mV rms, 80 MHz to 100 MHz
  • 1804 Direct: Same as 1803A
  • 1804 Prescale: 50 mV rms, 10 MHz to 550 MHz
  • FILTER
  • Switch selectable low-pass filter, cutoff frequency of 100 kHz
  • TIME BASE CHARACTERISTICS
  • Type: Crystal oscillator
  • Frequency: 5.24288 MHz
  • Temperature Stability: Better than ±.001% (+10 ppm) from 0°C to 50°C
  • Maximum Aging Rate: ±10 ppm/year
  • DISPLAY CHARACTERISTICS
  • Display: Eight 0.43" LED's
  • Overflow Indication: OVERflow indicator lights when count exceeds 99.999999 MHz
  • Display Update Time: 1.0 second gate: 2.0 seconds; 0.1 second gate: 0.2 second
  • Low Battery Indication: Model 1803A Only: All digits flash for battery voltage under 7.0 V
  • GENERAL
  • Power:
  • AC Operation: 120 V, 60 Hz or 220 V, 50/60 Hz
  • Battery Operation: (Model 1803A Only) Six AA cells, Alkaline or Ni-Cad; user installed
  • Dimensions: 2 x 6.5 x 6.75" (50 x 165 x 171 mm)
  • Weight: Approx. 24 oz. (680 g)

Controls & Indicators

Input Jack (1803A), Direct Input Jack (1804), Input jack for 5 Hz to 100 MHz frequency measurements. Preseale Input Jack (1804 only). Input jack for 10 MHz to 550 MHz frequency measurements. Display. Eight-digit display used for all frequency readings. OVERflow Indicator. Lights whenever range of display is exceeded (99.999999 MHz). POWER/GATE TIME Switch. 3-position slide switch (OFF-0.1S-1.0S). LPF Switch (1803A), INPUT SELECT Switch (1804).

Operation

The operation of the frequency counters involves connecting the AC Adapter to an outlet and plugging it into the rear panel jack of the frequency counter. For Model 1803A, battery or external DC power can also be used. The POWER/GATE TIME switch should be set to either 0.1S or 1.0S to turn on the instrument. The 0.1S setting is for faster measurement of high-frequency signals with a display update time of 0.2 seconds and a resolution of 10 Hz for Model 1803A or the direct input of Model 1804, and 100 Hz for the prescale input of Model 1804. The 1.0S setting is for measuring low frequencies or where the highest resolution is needed, with a display update time of 2 seconds and a resolution of 1 Hz for Model 1803A or the direct input of Model 1804, and 10 Hz for the prescale input of Model 1804. The signal to be measured should be applied to the input jack, with Model 1803A accepting 5 Hz to 100 MHz signals and Model 1804 accepting 5 Hz to 100 MHz signals at the direct input jack.

Download PDF (357.3 KB)

Leave a Comment