The manual for B&K Precision's programmable DC power supplies models 1785A, 1786A, and 1787A covers setup and operation instructions, including general and standard operation modes, as well as precautions for use and troubleshooting procedures. It also details the use of the optional RS-232 interface for PC connectivity and provides guidance on using the pre-set feature to store voltage and current settings.
Manual Overview
The B&K Precision models 1785A, 1786A, and 1787A are programmable DC power supplies designed for precision and flexibility. They feature a micro-controller-based system with digital operation control and an analog output, offering a blend of accuracy and quiet operation. The units support an optional RS-232 interface for PC connectivity. Troubleshooting begins with a self-diagnostic routine upon startup, where displays count from zero to nine. If an over-voltage condition occurs, the over-voltage protection (O.V.P.) feature triggers, cutting power and displaying an E-Err warning. Users should switch off the unit, remove all loads, and restart. Persistent issues require service center attention. Calibration involves setting voltage and current manually or using pre-set features, allowing storage of up to nine configurations. Error codes appear if settings exceed the unit’s capabilities, prompting re-entry. The units operate in constant voltage (C.V.) or constant current (C.C.) modes, indicated by respective displays. The manual emphasizes reading all instructions before use to ensure safe and effective operation.
Quick Issues Covered
- Self-diagnostic routine checks during power-up.
- E-Err warning for over voltage protection activation.
- Error codes for voltage/current settings beyond limits.
Overview
The product covered in the manual is a series of programmable DC power supplies, specifically models 1785A, 1786A, and 1787A. These units are micro-controller based and offer a total supply capability of 90W. They combine digital operation control with analog output control for ease and accuracy. The manual includes sections on specifications, controls and indicators, operating instructions, precautions for use, and using the PC interface. The power supplies also have an optional RS-232 interface for PC connectivity.
Specifications
- Output (DC) 0 – 18V 0 – 30V 0 – 60V
- Output Current (Amp.) 5 3 1.5
- Ripple & Noise (RMS) 1mV
- Line Regulation 0.02% + 5mV
- Load Regulation 0.02% + 5mV
- RS – 232 Option
- Operating Voltage 115/230 VAC , 50/60Hz
- Dimension (W.H.D.) 8.07 x 4.53 x 10.63 in. (205 x 115 x 270 mm)
- Accessory Supplied User Manual
- Weight App. 11 lbs (5 Kg)
- Display LED Voltmeter & Ammeter
- Cooling System Natural convection
- Power Consumption Approximate 220 VA / W | Approximate 200 VA/W
- Operating ambient temperature 41° to 104°F (5 to 40°C) 10 – 80% R.H.
- Input fuse F5 AC100V, 110V, 120V 5x20mm 3A 250V Fast Blow
- AC220V, 230V, 240V 5x20mm 2A 250V Fast Blow
- Internal fuse F1 5x20mm 0.5A 250V Fast Blow
- Internal fuse F2 5x20mm 0.5A 250V Fast Blow
- Internal fuse F3 5x20mm 0.5A 250V Fast Blow
- Internal fuse F4 5x20mm 0.5A 250V Fast Blow
Controls & Indicators
The front-panel controls and indicators for the programmable DC power supplies include:
1. Power Switch: Turns the power supply on and off.
2. Ammeter Display: Indicates output current.
3. Voltmeter Display: Indicates output voltage.
4. Output “+” Terminal (Red): Positive polarity output terminal.
5. Output “-” Terminal (Black): Negative polarity output terminal.
6. Ground “GND” Terminal (Green): Ground terminal connected to chassis.
7. CC Display: Indicates the unit is in constant current mode (also serves as a minute indicator in program mode).
8. CV Display: Indicates the unit is in constant voltage mode (also serves as a second indicator in program mode).
9. Keypad: Used for inputting settings.
10. Serial Port: Port for optional PC interface.
11. Main Cable: Connects the unit to power.
12. Fuse: Provides overcurrent protection.
Operation
The manual provides detailed steps for operating the programmable DC power supplies in both standard and timed operation modes. In standard operation mode, the user can set the voltage and current manually or use the pre-set feature to store up to nine pre-programmed settings. For manual operation, the user presses the ‘ENTER’ key to set the voltage and current levels using the keypad, ensuring they are within the unit’s capability. The pre-set feature allows storing and recalling settings even when the unit is off. The unit maintains the set voltage and current until reprogrammed.