The manual for BK Precision models 1760A, 1761, and 1762 covers the setup and operation of triple output DC power supplies, including instructions for independent and tracking modes, as well as safety precautions to prevent electrical shock. It also provides troubleshooting guidance, such as fuse replacement and adjustments for voltage and current settings, to ensure proper functionality and maintenance of the equipment.
Manual Overview
The B+K Precision 1760A, 1761, and 1762 Triple Output DC Power Supplies are designed for versatile use in electronics servicing, manufacturing, and education. These units feature two main adjustable supplies and a third auxiliary output, with dual 4-digit LED displays for monitoring current or voltage. The main supplies can be used independently or in series/parallel tracking modes, allowing for flexible voltage and current configurations. Troubleshooting involves checking for correct operation modes, ensuring the LED indicators for constant voltage (CV) or constant current (CC) modes are functioning, and verifying connections and settings. Error diagnostics include monitoring for overload conditions, indicated by an LED, and ensuring the unit is not exceeding its current or voltage limits. Calibration and adjustments are detailed for each supply, with specific instructions for metering and tracking adjustments. Board-level guidance includes ensuring proper connections and using the built-in overload and reverse polarity protections to prevent damage. Regular maintenance includes fuse replacement and line voltage conversion as needed.
Quick Issues Covered
- Diagnose power-up failures with LED display indicators.
- Calibrate 'A' and 'B' supply metering for accurate readings.
- Use schematics for circuit tracing and fault isolation.
Overview
The B+K Precision Triple Output DC Power Supplies, models 1760A, 1761, and 1762, are high-quality, general-purpose DC power sources. They feature two main adjustable supplies and a third auxiliary output, with the main supplies capable of precise voltage control and current output of 0-2A (0-3A for model 1761). The third supply offers a current output of 0-5A, suitable for digital logic circuitry. The units include dual 4-digit LED displays for monitoring current or voltage. They can operate independently or in series/parallel tracking modes, providing flexibility in voltage and current settings. The power supplies are designed with excellent regulation, low ripple, overload protection, reverse polarity protection, and isolation from chassis and earth ground for versatile and safe operation.
Specifications
- Triple Output
- DC Power Supply
- Dual 4-Digit LED Displays
- Adjustable Voltage Supplies
- Coarse and Fine Voltage Controls
- Current Output: 0-2A (0-3A for model 1761)
- Third Supply Current Output: 0-5A
- Built-in Overload Protection
- Series Tracking Mode
- Parallel Tracking Mode
- Constant Voltage and Constant Current Applications
- Reverse Polarity Protection
- Isolated Output from Chassis and Earth Ground
Operation
The manual describes the operation and basic usage steps for the BK Precision Models 1760A, 1761, and 1762 Triple Output DC Power Supplies. These power supplies feature two main adjustable supplies and a third auxiliary output. The main supplies can be used independently or in series or parallel tracking modes. In series tracking, the “B” supply tracks from 5% to 100% of the “A” supply’s voltage, allowing for double the voltage setting when connected in series. In parallel tracking, the supplies are connected in parallel for double the current setting. The supplies can operate in constant voltage or constant current modes, with smooth automatic crossover between the two. LED indicators show the mode of operation. The third supply is ideal for digital logic circuitry with a current output of 0-5A and built-in overload protection. The power supplies offer excellent regulation, low ripple, reverse polarity protection, and current limiting. The output is isolated from chassis and earth ground, allowing flexible connections.
Safety & Warnings
Normal use of test equipment can expose users to electrical shock, especially when testing where high voltage is present. A current of 10 milliamps passing through the heart can be fatal, and voltages as low as 35 volts DC or AC rms can be dangerous. To prevent electrical shock, follow these precautions:
1. The DC output of the power supply poses little shock danger, but certain test conditions can create high voltage shock hazards:
a. A “hot chassis” type equipment under test poses a serious shock hazard unless unplugged or isolated with a transformer.
b. If the equipment under test is powered and uses high voltage, the power supply outputs may be floated to the potential at the connection point. Do not float the power supply output to more than 100 volts peak with respect to chassis or earth ground.
c. If the equipment under test is off but uses high voltage, discharge high-voltage capacitors before making connections or tests.
2. Use a polarized 3-wire AC outlet to ensure the power supply chassis, case, and ground terminal are connected to a good earth ground, reducing shock danger.
3. Avoid exposing high voltage unnecessarily. Remove housings and covers only when necessary, turn off equipment while making test connections in high-voltage circuits, and discharge high-voltage capacitors after removing power.