BK Precision 1711 Instruction Manual (2) (PDF)

The manual for the BK Precision Model 1711 DC Power Supply provides detailed instructions on setup, operation, and troubleshooting, including safety precautions, specifications, and maintenance procedures. It covers the use of the power supply in constant voltage and constant current modes, with guidance on connecting multiple units, setting current limits, and ensuring safe operation to prevent electrical shock and equipment damage.

  • Brand: BK Precision
  • Model: 1711
  • Type: manual
  • File size: 1.1 MB

Manual Overview

The BK Precision Model 1711 DC Power Supply manual provides detailed guidance for technicians on troubleshooting, error diagnostics, calibration, and board-level adjustments. The power supply offers a 0-60V, 0-2A output with precise voltage and current adjustability. It features automatic crossover between constant voltage and constant current modes, indicated by LEDs. For troubleshooting, technicians should follow the flow from checking the power supply’s output settings to ensuring proper connections, especially when dealing with high-voltage equipment. Error diagnostics involve monitoring the built-in meters for output voltage and current, ensuring they align with expected values. Calibration involves adjusting the coarse and fine controls to maintain voltage regulation within specified limits. Board-level guidance includes ensuring the pre-regulator is functioning to limit internal dissipation and verifying that reverse polarity protection is active to prevent damage. The manual emphasizes safety precautions, such as using a polarized 3-wire AC outlet and avoiding unnecessary exposure to high voltage, to mitigate electrical shock risks.

Quick Issues Covered

  • Diagnose power-up failures with voltage/current regulation issues.
  • Identify error codes related to constant voltage/current mode.
  • Calibrate output voltage using coarse and fine adjustments.

Overview

The B+K Precision Model 1711 is a general-purpose DC power supply providing 0-60 volts and 0-2 amps output. It features adjustable current and voltage settings, excellent regulation, low ripple, and built-in metering. The power supply can operate in constant voltage or constant current modes with smooth automatic crossover. It includes safety features like reverse polarity and overload protection. The output is isolated, allowing flexible connections, and the unit is suitable for various applications, including electronics servicing, manufacturing, design labs, education, and hobbyist use.

Specifications

  • OUTPUT VOLTAGE
  • 0 to 60 VDC, coarse and fine adjustment
  • OUTPUT CURRENT
  • High Range —0 to 2 A
  • Low Range —0 to 0.5 A
  • CONSTANT VOLTAGE OPERATION
  • Voltage Regulation
  • Line (108-132) <0.01% +3 mV
  • Load (no load to full load) <0.01% +5 mV
  • Recovery Time <100 µs typical
  • Ripple Voltage
  • RMS <1 mV
  • METERING
  • Voltmeter
  • Range 0 to 64 V
  • Accuracy ±2.5%
  • Ammeter
  • Hi Range 0 to 2.2 A
  • Lo Range 0 to 0.55 A
  • Accuracy ±2.5%
  • POWER REQUIREMENTS
  • Domestic: 120 VAC ±10%, 60 Hz
  • International: 120, 220, 230, 240 VAC ±10%, 50/60 Hz
  • POWER CONSUMPTION
  • Approximately 210 Watts or less at full load

Safety & Warnings

Normal use of test equipment exposes users to a certain amount of danger from electrical shock. An electrical shock causing 10 milliamps of current to pass through the heart can stop most human heartbeats. Voltage as low as 35 volts dc or ac rms is considered dangerous and hazardous as it can produce a lethal current under certain conditions. Higher voltages are even more dangerous. Users should follow accepted practices to prevent contact with exposed high voltage and steer current away from the heart in case of accidental contact.

1. There is a danger of electrical shock from the DC output of the power supply because it can source 60 Vdc. Several test conditions using this power supply can create a high voltage shock hazard:
a. If the equipment under test is the “hot chassis” type, a serious shock hazard exists unless the equipment is unplugged or an isolation transformer is used.
b. If the equipment under test is “powered up” and uses high voltage in any of its circuits, the power supply outputs may be floated to the potential at the point of connection. High voltage may appear at unexpected points in defective equipment. Do not float the power supply output to more than 100 volts peak with respect to chassis or earth ground.
c. If the equipment under test is “off” and uses high voltage in any of its circuits under normal operation, discharge high-voltage capacitors before making connections or tests. Some circuits retain high voltage long after the equipment is turned off.

2. Use only a polarized 3-wire ac outlet to ensure the power supply chassis, case, and ground terminal are connected to a good earth ground, reducing the danger from electrical shock.

3. Do not expose high voltage needlessly. Remove housings and covers only when necessary. Turn off equipment while making test connections in high-voltage circuits. Discharge high-voltage capacitors after removing power.

Download PDF (1.1 MB)

Leave a Comment