The manual for the BK Precision Model 1610 and 1630 DC Power Supplies provides detailed instructions for setup, operation, and troubleshooting, including information on constant voltage and current applications, safety precautions, and connection configurations. It also covers features such as reverse polarity protection, overload protection, and built-in metering for monitoring output voltage and current.
Manual Overview
The B&K Precision Models 1610 and 1630 DC Power Supplies are designed for general-purpose applications, offering 0-30 volts DC output with adjustable coarse and fine controls. Model 1610 provides a current output of 0-1 amp, while Model 1630 offers 0-3 amps. These power supplies can operate in either constant voltage or constant current modes, with automatic crossover between the two. The units feature LED indicators for mode identification and built-in meters for continuous monitoring of output voltage and current. Troubleshooting involves checking for proper connections, ensuring the equipment under test is not a “hot chassis” type, and verifying that high-voltage capacitors are discharged before testing. Error diagnostics are facilitated by the power supply’s protection features, including reverse polarity and overload protection. Calibration involves setting current limits from 5% to 100% of maximum output. The output is isolated from chassis and earth ground, allowing flexible connections, including series or parallel configurations for increased voltage or current output. The manual emphasizes safety precautions to prevent electrical shock, particularly when working with high voltage.
Quick Issues Covered
- Diagnose power-up failures with LED mode indicators.
- Error codes for constant voltage/current crossover issues.
- Schematics aid in circuit tracing and troubleshooting.
Overview
The B & K-Precision Model 1610 and 1630 DC Power Supplies are high-quality, general-purpose DC power sources. Both models provide 0-30 volts DC output, adjustable with coarse and fine controls. The Model 1610 offers a current output of 0-1 amp, while the Model 1630 provides 0-3 amps. These power supplies can operate in constant voltage or constant current modes, with smooth and automatic crossover between the two. They feature excellent regulation, low ripple characteristics, and built-in metering for continuous monitoring of output voltage and current. The manual covers safety precautions, operating instructions, and maintenance, including fuse replacement and equipment precautions.
Specifications
- OUTPUT VOLTAGE
- 0 to 30 VDC, coarse and fine adjustment
- OUTPUT CURRENT
- HI Range 0 to 3 A (Model 1630), 0 to 1 A (Model 1610)
- LO Range 0 to 1.5 A (Model 1630), 0 to 0.5 A (Model 1610)
- CONSTANT VOLTAGE OPERATION
- Voltage Regulation
- Line (110-130 V) = 0.02% +2 mV (Model 1630), = 0.03% + 2 mV (Model 1610)
- Load (no load to full load) = 0.02% +3 mV (Model 1630), = 0.04% +3 mV (Model 1610)
- Recovery Time = 200 µs typical
- Ripple Voltage
- Peak-to-Peak <=3 mV
- RMS =2 mV
- Temperature Coefficient 5 mV/°C typical (Model 1630), 10 mV/°C typical (Model 1610)
- CONSTANT CURRENT OPERATION
- Adjustable Current Limits 5% to 100%
- (0.15 A to 3 A) (Model 1630), (0.05 A to 1 A) (Model 1610)
- Current Regulation
- Line (110-130 V) 3 mA typical (Model 1630), 8 mA typical (Model 1610)
- 12 mA maximum
- Load 5 mA typical
- 12 mA maximum
- Current Ripple <3 mA
Operation
The B & K-Precision Model 1610 and 1630 DC Power Supplies are designed for general-purpose use, providing 0-30 volts DC output with adjustable coarse and fine controls. The Model 1610 has a current output of 0-1 amp, while the Model 1630 offers 0-3 amps. These power supplies can operate in either constant voltage or constant current modes, with a smooth and automatic crossover between the two. LED indicators show the current mode of operation. In constant voltage mode, a current limit can be preset, and the unit will regulate output current if the preset limit is reached. Conversely, in constant current mode, the maximum voltage can be preset, and the unit will revert to regulated voltage operation if the current drops below the regulated value.
The power supplies feature reverse polarity protection to prevent damage from improper connections and current limiting to protect both the equipment being powered and the power supply itself. The output is isolated from chassis and earth ground, allowing flexible connections. The supplies can be connected in series for a 0-to-60 volt power source or in parallel with suitable balancing resistors for increased output current. These units are suitable for various applications, including service shops, engineering labs, production testing, school laboratories, and hobbyist use.
Safety & Warnings
Normal use of test equipment can expose users to electrical shock, especially when testing where high voltage is present. Electrical shock causing 10 milliamps of current through the heart can stop most human heartbeats. Voltage as low as 35 volts DC or AC RMS should be considered dangerous as it can produce a lethal current under certain conditions. Higher voltage poses a greater threat as it can more easily produce a lethal current. Accepted practices should be followed to prevent contact with high voltage and steer current away from the heart in case of accidental contact.
There is little danger of electrical shock from the DC output of this power supply, but certain test conditions can create a high voltage shock hazard. If the equipment under test is the “hot chassis” type, a serious shock hazard exists unless the equipment is unplugged or specific precautions are observed. If the equipment under test is “powered up” and uses high voltage in any of its circuits, the power supply outputs may be floated to the potential at the point of connection. High voltage may appear at unexpected points in defective equipment. Do not float the power supply output to more than 500 volts peak with respect to chassis or earth ground. If the equipment under test is “off” and uses high voltage in any of its circuits under normal operation, discharge high-voltage capacitors before making connections or tests, as some circuits retain high voltage long after the equipment is turned off.