BK Precision 1610 Instruction Manual (2) (PDF)

The manual for the B&K Precision Model 1610 and 1630 DC Power Supplies covers setup instructions, including controls and indicators, and provides operating instructions for constant voltage and constant current applications. It also includes troubleshooting guidance, such as fuse replacement and line voltage conversion, to ensure proper operation and maintenance of the power supplies.

  • Brand: BK Precision
  • Model: 1610
  • Type: manual
  • File size: 1.7 MB

Manual Overview

The B&K Precision Model 1610 and 1630 DC Power Supplies are designed for general-purpose use, providing adjustable output voltages from 0-30 volts DC. The Model 1610 offers a current output of 0-1 amp, while the Model 1630 provides 0-3 amps. Both models feature coarse and fine controls for precise voltage and current settings. Troubleshooting these units involves checking the LED indicators, which show whether the unit is in constant voltage (CV) or constant current (CC) mode. Error diagnostics focus on ensuring correct polarity and current limits to prevent damage. Calibration and adjustments are facilitated by the HI-LO switch, which allows for improved current settability and meter resolution. The power supplies are equipped with reverse polarity protection and current limiting to safeguard both the unit and connected devices. The output is isolated from the chassis and earth ground, allowing flexible connection configurations, including series and parallel setups. The manual includes a schematic diagram and parts list for board-level troubleshooting and maintenance.

Quick Issues Covered

  • Diagnose power-up failures with current and voltage monitoring.
  • Identify and resolve error codes using built-in metering.
  • Use schematics for circuit tracing and fault isolation.

Overview

The B & K-Precision Model 1610 and 1630 DC Power Supplies are high-quality, general-purpose DC power sources. Both models provide 0-30 volts DC output, adjustable with coarse and fine controls. Model 1610 offers a current output of 0-1 amp, while Model 1630 provides 0-3 amps. These power supplies can operate in constant voltage or constant current modes, with smooth and automatic crossover between the two. They feature reverse polarity protection, current limiting, and isolated output for flexible connections. The units are suitable for various electrical and electronics applications, including service shops, engineering labs, production testing, school laboratories, and home use by hobbyists.

Specifications

  • OUTPUT VOLTAGE
  • 0 to 30 VDC, coarse and fine adjustment
  • OUTPUT CURRENT
  • Model 1610: 0 to 1 A
  • Model 1630: 0 to 3 A
  • HI Range
  • Model 1610: 0 to 1 A
  • Model 1630: 0 to 3 A
  • LO Range
  • Model 1610: 0 to 0.5 A
  • Model 1630: 0 to 1.5 A
  • CONSTANT VOLTAGE OPERATION
  • Voltage Regulation
  • Line (110-130 V): 0.02% +2mV (Model 1630), 0.02% +3 mV (Model 1610)
  • Load (no load to full load): 0.02% +3 mV (Model 1630), 0.04% +3 mV (Model 1610)
  • Recovery Time: 200 µs typical
  • Ripple Voltage
  • Peak-to-Peak: 3 mV (Model 1630), 2 mV (Model 1610)
  • RMS: 5 mV (Model 1630), 10 mV (Model 1610)
  • Temperature Coefficient: 5 mV/°C typical (Model 1630), 10 mV/°C typical (Model 1610)
  • CONSTANT CURRENT OPERATION
  • Adjustable Current Limits
  • Model 1630: 5% to 100% (0.15 A to 3 A)
  • Model 1610: 5% to 100% (0.05 A to 1 A)
  • Current Regulation
  • Line (110-130 V): 5 mA typical (Model 1630), 6 mA typical (Model 1610)
  • Load: 5 mA typical (Model 1630), 5 mA typical (Model 1610)
  • Current Ripple: < 3 mA typical (Model 1630), <= 2 mA typical (Model 1610)
  • METERING
  • Voltmeter
  • Range: 0 to 32 V
  • Accuracy: ±2.5%
  • Ammeter
  • HI Range
  • Model 1630: 0 to 3.2 A
  • Model 1610: 0 to 1.04 A
  • LO Range
  • Model 1630: 0 to 1.6 A
  • Model 1610: 0 to 0.52 A
  • Accuracy: ±2.5%
  • POWER REQUIREMENTS
  • 110/120/220/240 VAC ±10%, 50/60 Hz
  • POWER CONSUMPTION
  • Model 1630: Approx. 170 W or less at full load
  • Model 1610: Approx. 60 W or less at full load
  • PROTECTION
  • Reverse polarity protection
  • Current limiting
  • TEMPERATURE RANGE
  • Operation: 0° to +40° C
  • Storage: -15° to +70° C
  • DIMENSIONS (HxWxD)
  • 172 x 119 x 305 mm
  • 6-3/4 x 4-11/16 x 12"
  • WEIGHT
  • Model 1630: 11 lb
  • Model 1610: 8 lb
  • ACCESSORIES SUPPLIED
  • Hook-Up Leads, 1 red, 1 black
  • Spare Fuse
  • Instruction Manual
  • Schematic Diagram & Parts List

Controls & Indicators

The source does not provide specific details about the front-panel controls/indicators.

Operation

The B & K-Precision Model 1610 and 1630 DC Power Supplies can operate in both constant voltage and constant current modes. The transition between these modes is smooth and automatic, with LED indicators showing the current mode. In constant voltage mode, a current limit can be preset, and if load variations cause the current to reach this limit, the unit will regulate the output current instead of the voltage. In constant current mode, the maximum voltage can be preset, and if load variations cause the current to drop below the regulated value, the unit will revert to regulated voltage operation. The output is isolated from chassis and earth ground, allowing for flexible connections. The power supplies can be connected in series or parallel for increased voltage or current output.

Download PDF (1.7 MB)

Leave a Comment