The B & K Precision Model 1601 service manual provides detailed instructions on setting up, operating, and troubleshooting the solid-state regulated DC power supply, including information on controls, indicators, and various applications. It covers specifications such as output voltage and current ranges, features like overload protection and easy operation, and maintenance guidelines to ensure optimal performance.
Manual Overview
The B & K Precision Model 1601 service manual provides detailed guidance on troubleshooting, diagnostics, calibration, and board-level adjustments for the solid-state regulated DC power supply. The manual emphasizes a structured troubleshooting flow, beginning with checking output voltage and current settings using the dual meters, which allow simultaneous monitoring. Error diagnostics are facilitated by the OVERLOAD indicator, which lights up when the current limit is exceeded, prompting an automatic shutdown. The set/reset button is used to clear overload conditions and adjust the current limit without affecting external connections. Calibration involves using the fine adjustment control for current limit settings, adjustable from 5% to 100% of the selected range. The manual also includes board-level guidance, detailing the use of integrated circuits, silicon transistors, and diodes, which contribute to the power supply’s reliability and efficiency. The power supply features a mechanical stop to prevent voltage levels from exceeding 25 volts in the 0-25V range, ensuring safe operation.
Quick Issues Covered
- Diagnose power-up failures with overload indicator and reset button.
- Calibrate current limit without disturbing external load connections.
- Includes schematics for circuit tracing and troubleshooting.
Overview
The B & K Precision Model 1601 is a solid-state regulated DC power supply designed for laboratory-quality applications. It provides regulated DC voltage and current outputs ranging from 0 to 50 volts and 0 to 2 amperes. The manual covers specifications, features, introduction, controls and indicators, operating instructions, applications, circuit description, and maintenance. The power supply is suitable for powering transistorized and fully solid-state electronic equipment, and it is particularly useful for service technicians, factory technicians, engineers, laboratory technicians, and electronics instructors and students.
Specifications
- OUTPUT VOLTAGE O-SO VDC, continuously var- LINE REGULATION Maximum 0.1%. 0.02% typ-
- iable. Two ranges, 0-25 and ical, at output Voltage of 50
- 0-50 VDC. VDC and output current of 2
- O-2 amperes. Four ranges: amps from 105-125 VAC.
- OUTPUT CURRENT
- O-SO mA, 0-0.2A. 0-0.5A, and RIPPLE 5 millivolts peak-to-peak
- 0-2A. maximum.
- CURRENT LIMIT 5% to 100% of each current CURRENT DERATING 02 A/ °C above 25° C am-
- ADJUSTMENT range. bient. (2 A Range only).
- LOAD REGULATION Maximum 0.1%. typical SIZE 141/8"
- 0.07%. x 37/8" x 10” deep.
- NET WEIGHT 11 Ibs.
Controls & Indicators
The front-panel controls and indicators for the B & K Precision Model 1601 Solid State Regulated DC Power Supply include:
1. Current Meter: Measures actual output load current during normal operation and indicates current limit value when the set/reset button is pushed.
2. Current Range Switch: Selects range for current meter and coarse setting of current limit with positions for 0.05A, 0.2A, 0.5A, and 2A.
3. Earth and Chassis Ground Terminal: Provides grounding.
4. Push to Set/Reset Button: Connects current meter to read the current limit setting when fully depressed and resets overload circuit when released.
5. Overload Indicator: A red light that illuminates when the current limit is exceeded and the power supply output has shut down.
6. Power Indicator: Lights continuously while the power supply is turned on.
7. Standby-DC On Switch: Removes or applies power to output terminals and voltmeter, with standby and DC on positions.
8. Set Current Limit Control: Fine adjustment of current limit setting, adjustable from 5% to 100% of the selected range.
9. Positive Polarity Output Terminal: Provides positive output.
10. Negative Polarity Output Terminal: Provides negative output.
11. Voltmeter: Indicates power supply output voltage.
12. Meter Range Switch: Allows selection of meter range, including a 0-50V position.
13. Level Control: Turns off power supply at extreme counterclockwise rotation and adjusts output voltage with clockwise rotation.