The service manual for the B&K Precision Dual-Trace Oscilloscope models 1474, 1479, 1479A, and 1479B covers setup, operation, and troubleshooting procedures, including detailed circuit descriptions and operator maintenance tasks like calibration checks and probe compensation. It emphasizes safety precautions due to the presence of high voltage up to 6000 volts during servicing and provides guidelines for safe handling and operation.
Manual Overview
The service manual for the B&K Precision dual-trace oscilloscope models 1474, 1479, 1479A, and 1479B provides comprehensive guidance for qualified technicians. It emphasizes safety precautions due to the presence of high voltage, up to 6000 V, which can pose a significant risk of electric shock. The manual outlines a detailed troubleshooting flow, focusing on identifying and resolving common issues. Error codes and diagnostics are crucial for pinpointing faults, and the manual provides specific instructions for interpreting these codes. Calibration and adjustments are covered extensively, ensuring accurate measurements and optimal performance. The manual includes board-level guidance, detailing the circuit descriptions such as vertical attenuator, preamplifier, and horizontal sweep circuits. It also provides instructions for operator maintenance, including calibration checks and probe compensation. Technicians are advised to follow the safety guidelines strictly, such as using insulated tools and maintaining one hand in the pocket to minimize risk. The manual is intended for use by experienced technicians familiar with electronic servicing to ensure safe and effective repairs.
Quick Issues Covered
- Diagnose power-up failures in 1474, 1479, 1479A, 1479B models.
- Error codes for dual-trace oscilloscope troubleshooting.
- Calibration and adjustments for accurate waveform display.
Overview
The product is a dual-trace oscilloscope with models 1474, 1479, 1479A, and 1479B, featuring a 30 MHz triggered sweep. The service manual is intended for use by qualified electronics technicians and covers test instrument safety, specifications, accessories, controls and indicators, circuit description, operator maintenance, and service procedures.
Safety & Warnings
Normal use and servicing of test equipment can expose individuals to electrical shock hazards, especially when high voltage is present. Electrical shock with a current of 10 milliamps passing through the heart can be fatal. Voltage as low as 35 volts can be dangerous. High voltage up to 6000 volts may be present when servicing the oscilloscope, and precautions should be taken when the unit is operating with the case removed. High voltage charges may be retained indefinitely, especially at the CRT socket and anode cap, and should be discharged with a grounded test lead after power is removed.
Avoid unnecessary exposure to high voltage by removing housings and covers only when necessary, turning off equipment while making test connections, and discharging high-voltage capacitors after removing power. Familiarize yourself with the equipment and its high voltage points, but be aware that high voltage may appear unexpectedly in defective equipment. Use insulated floor material or a large, insulated floor mat, and an insulated work surface that is not damp or wet. Use the “one hand in the pocket” technique to avoid providing a ground return path.
The oscilloscope’s ground wire connects the chassis and housing to earth ground. Do not defeat the ground wire connection or float the oscilloscope, as this poses a safety hazard. Touch only the insulated portion of a probe, never the exposed tip. Remember that ac line voltage is present on some power input circuits whenever the equipment is connected to an ac outlet, even if turned off.
This service manual is intended for qualified electronics technicians only. Do not perform servicing unless qualified, as high voltages up to 6000 V dc are present during operation. Line voltage is present on the power input circuit whenever the ac power cord is connected to a live outlet, even if the scope is turned off. Observe all high voltage safety precautions when the housing is removed to avoid fatal electric shock.