The service manual for the B&K Precision Models 1403A and 1405 oscilloscopes provides detailed instructions on setup, operation, and troubleshooting, including specifications, controls, circuit descriptions, adjustments, and maintenance procedures. It emphasizes safety precautions due to the presence of high voltage and includes a history of production changes that may affect servicing and repair.
Manual Overview
The service manual for the B&K Precision Models 1403A and 1405 oscilloscopes provides detailed instructions for troubleshooting, error diagnostics, calibration, and board-level guidance. Troubleshooting is structured through a logical flowchart, assisting technicians in identifying and resolving common issues. The manual includes a comprehensive list of error codes and diagnostics, enabling precise identification of faults. Calibration and adjustments are covered extensively, with step-by-step procedures to ensure accurate waveform measurements. Board-level guidance is provided, detailing circuit board layouts and component functions to facilitate repairs and replacements. Safety precautions are emphasized, particularly regarding the high voltage present during operation, which can reach approximately 1,400 volts. The manual advises on using insulated materials and techniques to minimize electrical shock risk. Differences between models 1403A and 1405 are noted, primarily in external hardware and cosmetic features, while maintaining similar electrical characteristics. The manual is intended for qualified electronics technicians due to the potential hazards involved in servicing these devices.
Quick Issues Covered
- Diagnosing power-up failures in Model 1405 oscilloscopes.
- Error codes related to sweep range issues in Model 1405.
- Schematics for circuit tracing and repairs in Model 1405.
Overview
The BK Precision Models 1403A and 1405 are compact, single-trace oscilloscopes designed for general-purpose waveform observation. They use a 3-inch round CRT with a 12 x 12 division graticule, allowing waveforms to be viewed on approximately 8 x 10 divisions. The vertical channel has a bandwidth of DC to 5 MHz and a sensitivity of 10 mV/division, with an input impedance of 1 Megohm. The horizontal channel uses a recurrent type sweep with four ranges and a variable control to cover the 10 Hz to 100 kHz band. The manual covers the service information for these models, including specifications, controls and indicators, circuit description, adjustments, maintenance, troubleshooting, parts list, voltage chart, circuit board map, schematic diagram, and history of product changes. The manual is intended for qualified electronics technicians due to the presence of high voltage, which poses a risk of electric shock.
Safety & Warnings
Normal use of test equipment and servicing exposes users to electrical shock risks, especially with high voltage present. A current of 10 milliamps through the heart can be fatal, and voltages as low as 35 volts can be dangerous. Safety precautions include:
1. High voltage up to 1,400 volts is present when servicing the oscilloscope. Discharge high voltage capacitors with a grounded test lead after removing power.
2. Avoid exposing high voltage unnecessarily. Turn off equipment while making test connections and discharge capacitors after power removal.
3. Familiarize yourself with the equipment and high voltage points, but be aware that high voltage may appear unexpectedly in defective equipment.
4. Use insulated floor materials or mats and ensure surfaces are dry.
5. Use the “one hand in the pocket” technique to handle probes, avoiding contact with grounded metal objects.
6. The oscilloscope’s chassis is grounded through the power plug. Do not defeat the ground connection.
7. Touch only the insulated portion of probes.
8. AC line voltage may be present on power input circuits even if the equipment is turned off.
This manual is intended for qualified electronics technicians only.