BK Precision 1245 Instruction Manual (PDF)

The B & K Model 1245 Solid State Color Generator manual provides detailed instructions for setting up, operating, and troubleshooting the device, which is used for adjusting color TV sets by generating various patterns such as dot, crosshatch, horizontal, and vertical lines. It also explains how to connect the generator to a TV, adjust the color amplitude and pattern settings, and use the Gun Killer switches to control the color guns of the picture tube.

  • Brand: BK Precision
  • Model: 1245
  • Type: manual
  • File size: 667.0 KB

Manual Overview

The B & K Model 1245 Solid State Color Generator is designed for the convergence and adjustment of color TV sets. It provides various patterns such as dot, crosshatch, horizontal, and vertical lines to assist in adjusting horizontal and vertical linearity, size, and convergence. The generator operates on the “offset-subcarrier” principle, producing ten color-bar signals spaced at 30° phase intervals. For troubleshooting, the manual outlines the use of two main controls: the Color/Vert Line Amp for power and color amplitude adjustments, and the Pattern Selector Switch for choosing display patterns. Calibration involves tuning the RF output to Channel 3, 4, or 5 by adjusting the RF coil. The Gun Killer switches allow control over the color guns of the picture tube. For diagnostics, the manual suggests adjusting the TV’s hue control to ensure accurate color representation, with cyan as the reference color for proper alignment. The generator’s output is connected directly to the TV’s antenna terminals for operation.

Quick Issues Covered

  • Diagnose power-up failures with color amplitude control adjustments.
  • Identify error codes related to color bar phase alignment.
  • Use schematics for circuit tracing and RF coil adjustments.

Overview

The B & K Model 1245 Solid State Color Generator is a portable device designed for the quick and easy convergence and adjustment of color TV sets. It features a crystal-controlled, keyed rainbow color display for testing color circuits, hue control, and aligning color demodulators. The generator provides various patterns, including dot, crosshatch, horizontal, and vertical lines, for adjusting TV linearity and size. It operates with an RF output on Channel 3, 4, or 5, using the “offset-subcarrier” principle to generate color bars. The manual covers the complete use of the instrument, emphasizing its reliability and ease of operation.

Specifications

  • WEIGHT: 3 Ibs.
  • HEIGHT: 27%”
  • WIDTH: 8%”
  • DEPTH: 8%”

Controls & Indicators

The B & K Model 1245 Color Generator has two front panel controls:

1. Color/vert Line Amp: This control serves as the A.C. power off/on switch and the Color Amplitude control. It sets the level of the color subcarrier and checks the color sync lock ability of the TV receiver. The amplitude is variable from 0 to 200%, with the midpoint providing normal or 100% output. It also includes the vertical lines brightness control to establish the proper ratio between vertical and horizontal line brightness.

2. Pattern Selector Switch: This switch allows the selection of different patterns, including DOTS, CROSSHATCH, HORIZONTAL LINES, VERTICAL LINES, and COLOR pattern. Each pattern serves specific functions for adjusting convergence, linearity, and color alignment on TV receivers.

Additionally, the front panel includes Gun Killer switches that control the color guns of the picture tube. By connecting colored clip leads to the picture tube control grids and operating the switches, the tube color guns can be activated or deactivated.

Operation

Operation of the B & K Model 1245 Color Generator involves the following steps:

1. Disconnect the antenna line from the TV receiver and attach the generator output alligator clips to the antenna terminals.
2. Turn on the TV receiver and tune it to Channel 3, unless the generator has been reset to another channel.
3. Turn on the 1245 power switch.
4. Set the pattern switch to the color bar position and adjust the color amplitude control to the mid-range.
5. Fine-tune the TV receiver to achieve the sharpest color bar pattern.
6. Increase the TV receiver’s color saturation control until color appears on the bars.
7. If the receiver is functioning correctly and is properly adjusted, ten bars will be visible on the screen.
8. To deactivate the CRT guns, identify the control grid leads from the CRT socket, usually colored red, green, and blue. Connect the black alligator clip to the TV chassis. You can attach the alligator clips directly onto the control grid leads, ensuring contact with the copper wire.
9. Use the Gun Killer Switch to deactivate any gun by selecting the switch matching the gun’s color and moving it to the ON position. To reactivate, move the switch to the OFF position.

Download PDF (667.0 KB)

Leave a Comment