The B&K Precision Model 889 Synthesized In-Circuit LCR/ESR Meter manual provides detailed instructions on setting up and operating the device, including making measurements of inductors, capacitors, and resistors, as well as performing DC/AC voltage measurements and diode/audible continuity checks. It also covers troubleshooting procedures and includes information on RS-232 operation, test leads connection, open/short compensation, and selecting series or parallel modes.
Manual Overview
The B&K Precision Model 889 Synthesized In-Circuit LCR/ESR Meter is a versatile instrument designed for measuring inductors, capacitors, and resistors with a basic accuracy of 0.2%. It supports both DC and AC impedance measurements, making it suitable for a wide range of applications in electronic engineering labs, production facilities, service shops, and educational settings. The meter features auto and manual ranging, selectable test frequencies from 100 Hz to 100 KHz, and test voltages up to 1 Vrms or 1 VDC for DCR measurements. It includes a dual display for simultaneous measurements and supports RS-232 interface communication for data transfer.
For troubleshooting, the manual provides guidance on open and short calibration, and error diagnostics are facilitated through the display of primary and secondary measurement parameters. The Model 889 can measure DC and AC voltage, perform diode and audible continuity checks, and calculate parameters such as impedance, resistance, inductance, and capacitance. Calibration and adjustments are supported through open/short compensation and range hold features. Board-level guidance is not explicitly detailed, but the meter’s comprehensive measurement capabilities make it a valuable tool for component testing and verification.
Quick Issues Covered
- Diagnose open/short calibration issues in LCR measurements.
- Resolve RS-232 communication errors with command syntax checks.
- Use schematics for circuit tracing and component testing.
Overview
The B&K Precision Model 889 Synthesized In-Circuit LCR/ESR Meter is a high accuracy test instrument designed for measuring inductors, capacitors, and resistors with a basic accuracy of 0.2%. It includes built-in functions for DC/AC voltage measurements and diode/audible continuity checks, making it a versatile tool for engineers, students, and service technicians. The device supports auto and manual ranging, with selectable test frequencies and voltages, and features a dual display for simultaneous measurements. It is suitable for use in electronic engineering labs, production facilities, service shops, and educational settings, offering capabilities to check ESR values, sort components, and measure various electrical parameters.
Specifications
- Measuring Range:
- Z 0.0002 to 500.0MΩ
- L 0.030 μH to 9999H
- C 0.003 pF to 80.00 mF
- DCR 0.0002 to 500.0MΩ
- ESR 0.0002 to 9999 Ω
- D 0.000 to 9999
- Q 0.000 to 9999
- θ -180.0° to 180.0°
- Voltage Measurements:
- V 0.0mV to +/- 600 V
- Accuracy:
- DC Voltage Measurement:
- Range: 2V, 20V, 200V, and 600V
- Resolution: mV, 10mV, 100mV, and 1V
- Accuracy: +/- (0.4% + 3 digits)
- Input Impedance: 1 M-Ohm
- AC Voltage Measurement (True RMS):
- Range: 2V, 20V, 200V, and 600V
- Resolution: 1mV, 10mV, 100mV, and 1V
- Accuracy: +/- (0.8% + 5 digits)
- Input impedance: 1 M-Ohm
- LCR Measurement:
- Z Accuracy (Δe):
- 0.5% + 1
- 0.2% + 1