The manual for the Bk precision Data Logger Sound Level Meter provides detailed instructions on setup, operation, and troubleshooting, including how to configure the clock and recording intervals, use the RS232 interface for data communication, and perform calibration procedures. It also includes safety information, specifications, and guidance on using various functions such as MAX/MIN hold, frequency weighting, and time weighting.
Manual Overview
The BK Precision manual provides detailed guidance on using and maintaining the Data Logger Sound Level Meter. For troubleshooting, it emphasizes understanding error codes such as “OVER” and “UNDER,” which indicate when input levels exceed or fall below the measurement range. Calibration is performed using the CAL potentiometer, and adjustments are necessary to maintain accuracy within ±1.5dB under reference conditions. The manual outlines a step-by-step calibration procedure and advises using the RS-232 interface for diagnostics and data logging. For board-level guidance, it specifies using only designated replacement parts during repairs. The manual also includes instructions for setting up the clock and recording intervals, essential for accurate data logging. The device supports various frequency and time weightings, allowing for tailored measurements. It operates within specific environmental conditions, such as a temperature range of 0 to 40°C and humidity up to 90%. Regular maintenance includes wiping the case with a dry cloth and ensuring all safety symbols and precautions are adhered to for safe operation.
Quick Issues Covered
- Calibration procedures detailed for accurate sound level measurements.
- RS232 interface setup for data communication with PC.
- Error codes for over/under range sound level indications.
Overview
This manual covers the Data Logger Sound Level Meter, which conforms to IEC651 type2 and ANSI S1.4 Type2 standards. It includes safety information, specifications, and instructions for setup and operation. The meter features an internal memory capable of storing up to 32,000 records and uses an RS232 interface for communication with a PC. The manual provides details on calibration, measurement preparation, and operating precautions.
Specifications
- Standard applied: IEC651 Type2, ANSI S1.4 Type2.
- Frequency range: 31.5Hz ~ 8KHz
- Measuring level range: 30 ~ 130dB
- Frequency weighting: A/C
- Microphone: 1/2 inch electret condenser microphone
- Display: LCD
- Digital display: 4 digits
- Resolution: 0.1dB
- Display Update: 0.5 sec.
- Analog display: 50 segment bargraph
- Resolution: 1dB
- Display Update: 50 mS
- Time weighting: FAST (125mS), SLOW (1 sec.)
- Level ranges: Lo: 30 — 80 dB
- Med: 50 — 100 dB
- Hi: 80-~130 dB
- Auto: 30 — 130 dB
- Accuracy: +1.5dB (under reference conditions @ 94dB, 1KHz)
- Dynamic range: 100 dB (50 dB model 732A)
- Alarm function: “OVER” is when input is more than the upper limit of range.
- “UNDER” is when input is less than the lower limit of range.
- MAX/MIN hold: Holds readings the Maximum and Minimum Value.
- AC output: 1 Vrms at FS (full scale).
- Output impedance: Approx. 1000
- FS: means the upper limit of each level range.
- DC output: 10mV / dB, output impedance approx. 1KO
- Power supply: One 9V battery, OO6P or IEC 6F22 or NEDA 1604.
- Power life: About 50hrs (alkaline battery)
- AC adapter: Voltage 9 VDC, center pin negative, (8-15VDC Max)
- Supply current: > 30mMADC Socket: pin ? Ground
- Casing ? Positive External Diameter ? 3.5mm
- Internal Diameter 2? 1.35mm
- Electromagnetic Compatibility:
- RF field = 3V/m
- Total accuracy = specified accuracy + 0.5dB
- Operation temperature: 0 to 40°C (32° to 104°F)
- Operation humidity: 10° to 90%RH
- Storage temperature: -10° to 60°C (14° to 140°F)
- Storage humidity: 10 to 75%RH
- Dimensions (L x Wx H): 10.8 x 2.5 x 1.2inch (275 x 64 x 30mm)
- Weight: 285g (including battery)
- Accessories: 9V_ battery, carrying case, Screwdriver, Instruction manual.
- Windscreen, 3.5? plug, software & RS-232 cable (optional model 732A).
Safety & Warnings
Read the safety information carefully before operating or servicing the meter. Use the meter only as specified in the manual to ensure the protection provided by the meter is not impaired. The meter is designed for use at altitudes up to 2000 meters and in environments with a relative humidity of up to 90% and ambient temperatures between 0° and 40°C. Repairs or servicing not covered in the manual should only be performed by qualified personnel. Periodically wipe the case with a dry cloth and avoid using abrasives or solvents. Use only specified replacement parts when servicing.