The B&K Precision Model 350A Digital Clamp Meter manual covers setup and operation instructions for measuring AC and DC voltage, AC current, and resistance, as well as testing diode condition and checking continuity. It also provides troubleshooting tips, including safety precautions, battery replacement guidelines, and the use of special features like data hold and peak hold to enhance measurement accuracy and convenience.
Manual Overview
The B&K Precision Model 350A Digital Clamp Meter is designed for measuring AC and DC voltage, AC current, and resistance, with additional features for diode testing and continuity checks. The device includes a 3-1/2 digit LCD for direct readings and offers various ranges for different measurements. Troubleshooting involves using the overrange indicator and low-battery warning to ensure accurate readings. Calibration is automatic, with features like zero adjust and polarity indication. The meter’s peak hold function captures the highest voltage or current reading, aiding in the assessment of fluctuating signals. For board-level guidance, the clamp allows current measurement without wire disconnection, and test leads facilitate voltage and resistance measurements. Safety precautions include using insulated test leads, avoiding contact with metal objects, and ensuring the battery compartment is closed during use. The manual emphasizes the importance of understanding the instrument’s capabilities and operating techniques to maximize its utility.
Quick Issues Covered
- Diagnose power-up failures with battery and connection checks.
- Calibrate using peak hold and data hold features.
- Trace circuits with detailed schematics for Model 350A.
Overview
The B & K-Precision Model 350A Digital Clamp Meter is a versatile instrument designed for measuring AC and DC voltage, AC current, and resistance. It also includes features for testing diode condition and checking continuity. The meter allows for AC current measurement without disconnecting wires and provides direct readings on a 3-1/2 digit LCD. It offers multiple ranges and functions, including a continuity buzzer, low-battery indication, overrange indicator, data hold, and peak hold features. The manual recommends studying the entire document to fully understand the instrument’s capabilities and operating techniques.
Specifications
- AC Current: 20A, 200A, 1000A
- AC Voltage: 200V, 750V
- DC Voltage: 200V, 1000V
- Resistance: 200Ω, 2kΩ
- Display: 3-1/2 digit LCD
- Power Source: One 9V battery
- Dimensions: 295 mm x 76 mm x 35 mm
- Weight: 490 g
Safety & Warnings
The manual includes several safety warnings and precautions:
1. Do not exceed the specified input ratings to prevent personal injury or damage to the instrument.
2. Never use the clamp meter unless the battery compartment is closed.
3. Remove test leads before replacing the battery.
4. Always remove test leads when they are not in use to avoid danger.
5. Use only the safety type test leads supplied with the clamp meter.
6. Turn off equipment while making test connections in high voltage circuits and discharge high voltage capacitors after removing power.
7. For safe voltage measurement in high voltage equipment, do not touch equipment, meter, or test leads while power is applied.
8. Familiarize yourself with the equipment or system being tested and the location of its high voltage areas.
9. Use an insulated floor material or floor mat to stand on, ensuring surfaces are not damp or wet.
10. Keep one hand in the pocket while handling an instrument probe to avoid contact with nearby metal objects that could provide a ground return path.
11. When using a probe, touch only the insulated portion and never the exposed tip.
12. Never assume connections designated as “neutral” are at ground potential.
13. Ensure any ground is acceptable before relying on it.
14. Never assume circuit power is off until certain.
15. Never work alone; someone should be nearby to render aid if necessary, with training in CPR and first aid highly recommended.