BK Precision 325 Instruction Manual (PDF)

The manual for the Bk Precision Model 325 AC/DC True RMS Power Clamp Meter covers setup and operation instructions, including detailed steps for measuring DC and AC current, voltage, resistance, and frequency, as well as descriptions of various functions like HOLD and PEAK HOLD. It also provides troubleshooting guidance, such as safety precautions to avoid incorrect readings and instructions for battery replacement and maintenance.

  • Brand: BK Precision
  • Model: 325
  • Type: manual
  • File size: 372.8 KB

Manual Overview

The Bk Precision Model 325 AC/DC True RMS Power Clamp Meter manual provides detailed instructions for troubleshooting, diagnostics, calibration, and adjustments. For troubleshooting, the manual emphasizes ensuring all test leads are disconnected before current measurement and using the HOLD function to stabilize readings. Error diagnostics include recognizing overload conditions indicated by “OL” on the display and low battery warnings requiring immediate replacement when the battery symbol appears. Calibration involves zeroing the display for accurate DC current measurements using the ZERO key. The manual provides board-level guidance by cautioning against touching the circuit board to prevent damage from static electricity. The instrument’s specifications include a 3 3/4 digit LCD display, a sampling rate of 2 times per second, and a maximum jaw opening of 36 mm. Safety precautions highlight avoiding measurements in humid conditions and ensuring the operator is insulated from the measurement object. The manual also details the use of alignment marks for accurate readings and provides specific overload protection ratings for various measurement ranges.

Quick Issues Covered

  • Diagnose power-up failures with battery replacement guidance.
  • Calibrate measurements using zero and hold functions.
  • Trace circuits using detailed schematic diagrams.

Overview

The AC/DC True RMS Power Clamp Meter, Model 325 by Bk Precision, is a digital clamp meter designed for measuring electrical parameters such as current, voltage, resistance, and frequency. The manual provides detailed instructions on the safe operation of the device, specifications, and various measurement functions, including DC and AC current and voltage measurements, resistance, continuity tests, and frequency measurements. It also covers features like the HOLD function, ZERO relative function, MAX MIN function, PEAK HOLD function, and AUTO POWER OFF function. Additionally, the manual includes safety precautions, battery replacement instructions, and maintenance guidelines.

Specifications

  • Display: 3 3/4 digits LCD with max. reading 3999, plus decimal point, unit symbol indication.
  • Overload Indication: LCD will show “OL” in the left highest position.
  • Low Battery Indication: Replace battery immediately when LCD displays ‘1’.
  • Sampling Rate: 2 times per second for digital display.
  • Power Supply: 9V NEDA 1604 IEC 6F22 JIS O06P battery x 1pc.
  • Battery Life: About 200 hours.
  • Jaws opening: Max. 36 mm.
  • Conductor size: Max. 35mm.
  • Dimension: 218mm(L)x75mm(W)x43mm(F).
  • Weight: About 375g. (Including battery)
  • Accessories: Test Leads, manual, carrying case, battery.

Safety & Warnings

Take extreme care for the following conditions while measuring:

1. Measuring voltage over 20V as it may cause human body electricity conduction.
2. Measure AC power.
3. Do not measure voltage, current under humid or wet environment.
4. If any unusual condition (such as breakage, deformation, fracture, foreign substance, no display, etc.) of the test leads end (metal part) and attachment of the meter occurs, do not conduct any measurement.
5. Do not contact any exposed metal (conductive) parts, such as the end of test lead, jack, fixing object, circuit, etc.
6. Keep yourself insulated from the object being measured.
7. Do not operate the meter in an environment with explosive gas (material), combustible gas (material) steam, or filled with dust.
8. To avoid reading incorrect data, replace the battery immediately when the symbol appears on the LCD.
9. To avoid damage caused by contamination or static electricity, do not touch the circuit board before taking adequate action.
10. Operating Environment: Indoors use. This instrument is designed for use in an environment of pollution degree 2.
11. Operation Altitude: Up to 2000M.
12. Operating Temperature & Humidity: 5°C ~ 40°C, below 80% RH.
13. Storage Temperature & Humidity: -10°C ~ 60°C, below 70% RH.
14. Fingers should hold under the protection guard of the test probe.
15. Category: EN 61010-1(2001) and EN 61010-2-032(2002) CAT III 600V & CAT II 1000V.

Download PDF (372.8 KB)

Leave a Comment