Rohde & Schwarz SME Service Manual Book4 Chapt4 (PDF)

The Rohde & Schwarz SME service manual provides detailed instructions for setting up, operating, and troubleshooting the reference oscillator OCXO SM-B1, including procedures for checking and calibrating the oscillator and amplifier, diagnosing issues, and ensuring proper data transmission and power consumption. It also covers the disassembly and reassembly of the device, as well as the configuration of external interfaces and the handling of error messages such as "OVEN COLD."

  • Brand: Rohde & Schwarz
  • Type: service manual
  • File size: 1.7 MB

Manual Overview

The Rohde & Schwarz SME service manual, specifically for the OCXO reference oscillator option, provides detailed instructions for troubleshooting, diagnostics, calibration, and adjustments at the board level. Troubleshooting involves tracking frequency errors by following the tuning voltage to the oscillator and recalibrating for minor deviations due to aging. Power level errors require checking the control signal OSCOFF and the output level of the oscillator. Calibration procedures include using a calibrated frequency counter to ensure the output frequency is precisely 10.000000 MHz, with specific instructions for mechanical adjustments on variant 06. Diagnostics involve verifying the status of the oscillator using specific test points and ensuring the correct display of configuration values. The manual also details the process for verifying the interrupt generation for the “OVEN COLD” message, which indicates the thermostat status of the quartz oscillator. Additionally, it provides guidance on the disassembly and reassembly of the module, including the removal of the device’s casing and the detachment of connectors and cables. External interface specifications are also outlined, detailing the signal descriptions and pin configurations.

Quick Issues Covered

  • Diagnose 'OVEN COLD' interruptions for oscillator temperature issues.
  • Calibrate oscillator frequency using frequency counter and menu settings.
  • Troubleshoot frequency and level errors in oscillator output.

Overview

The product is the Rohde & Schwarz Option Reference Oscillator OCXO SM-B1, which replaces the internal 10-MHz time base with a high-quality quartz oscillator, improving the device’s reference frequency accuracy and aging characteristics. The manual covers checking and repairing the assembly, functional description, troubleshooting, testing and adjustment, disassembly and reassembly, and external interfaces.

Specifications

  • Quarzoszillator
  • Interne Datenspeicherung
  • Diagnose
  • Schaltbarer Auskoppelverstärker
  • Interrupt-Erzeugung für "OVEN COLD"-Anzeige
  • Stromaufnahme +5V max. 2mA
  • Stromaufnahme -15V max. 7mA
  • Stromaufnahme +12V heizen max. 250mA / 270mA
  • Stromaufnahme +12V stabil max. 130mA / 150mA
  • 10MHz-Signal Amplitude 7.5±1.5 dBm
  • Oberwellenabstand >15dB
  • Kollektorspannung 12±1V
  • Logikpegel 5.6±0.1V "high", 6.4±0.1V "low"
  • Sollspannung 101 6.0±0.6V
  • Sollspannung 102 2.0±0.5V
  • Sollfrequenz 10.000000MHz

Installation / Setup

The source document provides detailed instructions for the setup and calibration of the Rohde & Schwarz OCXO reference oscillator. It includes specific steps for checking and adjusting the oscillator, measuring power consumption, and verifying the interrupt generation for the “OVEN COLD” message. It also outlines the necessary equipment, such as a DC voltmeter, HF spectrum analyzer, calibrated frequency counter, and oscilloscope. The document specifies the power consumption values during the heating and stable phases, and provides procedures for testing the oscillator and 10MHz amplifier, as well as the diagnostic checks. Additionally, it describes the steps for disassembly and reassembly of the device, and provides information on external interfaces and signal descriptions.

Download PDF (1.7 MB)

Leave a Comment