Rohde & Schwarz SME Service Manual Book1 Chapt2 (PDF)

The Rohde & Schwarz service manual for the SME model covers the setup, operation, and troubleshooting of various components, including the CPU, RAM, interfaces, and diagnostic tools. It provides detailed instructions on testing and maintaining the device's modules, updating firmware, and handling potential issues with memory and interfaces.

  • Brand: Rohde & Schwarz
  • Type: service manual
  • File size: 8.3 MB

Manual Overview

The service manual for the Rohde & Schwarz SME provides detailed guidance on troubleshooting, error diagnostics, calibration, and board-level adjustments for the front module, which includes components like the CPU, RAM, and various interfaces. The manual emphasizes the importance of preserving data stored in RAM and Flash-EPROMs, especially during firmware updates or calibration processes. Troubleshooting involves checking power supply voltages, contrast settings, and diagnostic branches. Error diagnostics are facilitated by self-diagnosis features using a 12-bit converter and specific diagnostic inputs. Calibration and adjustments are crucial for maintaining device accuracy, with procedures outlined for reference oscillator calibration and firmware updates via RS232 interface. Board-level guidance includes detailed descriptions of the CPU operations, RAM configuration, and the use of specific interfaces like IEC-Bus and SERBUS for communication and control. The manual also provides instructions for dismantling and reassembling the module, ensuring technicians can perform repairs and maintenance effectively.

Quick Issues Covered

  • Diagnose A/D-Wandler issues for self-diagnosis and troubleshooting.
  • Check and adjust DC/AC converter supply voltage for stability.
  • Firmware updates via RS232 interface for resolving software issues.

Specifications

  • CPU: 80960SB-16
  • 512K-Byte batteriegepuffertes RAM
  • Batterietest
  • Firmware in Flash-Eprom’s mit der Möglichkeit des Updates
  • EEPROM-Speicher (optional)
  • IEC-Bus Interface
  • SERBUS Interface
  • RS232 / V.24 Interface
  • ausreichend Timer ( >=4 16-Bit Timer )
  • Interruptcontroller
  • ACFAIL vom Netzteil löst maskierbaren Interrupt aus
  • Verarbeitung externer Triggersignale
  • LCD-Interface
  • Helligkeits- und Kontrasteinstellung für LCD
  • Drehknopf-Interface
  • Anschluss für Tastaturmatrix
  • Selbstdiagnose mit 12-Bit-Wandler
  • X-Ausgang ( 0… 10 V)
  • Variantenerkennung
  • Einige Steuerleitungen für andere Baugruppen
  • Digitale Aus- & Eingangssignale
  • SYS-RESET vom Netzteil löst einen Reset des Systems aus
  • Standby-Schalter und Standby-LED

Safety & Warnings

Im Frontmodul sind viele betriebsnotwendige Daten gespeichert. Die im RAM gespeicherten Daten können vom Gerät selbst wiederhergestellt werden, die Daten im Flash-EPROM jedoch nur mit Hilfsmitteln. Besteht die Gefahr, den Speicherinhalt der Flash-EPROMs zu verlieren, muss sichergestellt sein, dass neue Firmware geladen werden kann, eine Pegelkalibration durchgeführt werden kann, die Kalibrierdaten des Referenzoszillators wiederhergestellt oder eine Kalibration durchgeführt werden kann, und die Betriebsdaten im Menü UTILITIES/DIAG/PARAM wiederhergestellt werden können. Vor Arbeiten am Frontmodul sollten die betreffenden Daten notiert werden. Zur Wiederherstellung muss für die Kalibrierdaten des Referenzoszillators der Passwortschutz Level 2 entriegelt werden, das Passwort ist 250751. Danach kann im Menü UTILITIES/CALIB/REF OSC der notierte Wert wieder eingegeben und gespeichert werden. Für die Betriebsdaten muss der Passwortschutz Level 3 entriegelt werden, das Passwort ist bei der R&S-Vertretung zu erfragen. Das Menü UTILITIES/DIAG/SET PARAM wird dann sichtbar und die Daten können wieder eingegeben werden.

Download PDF (8.3 MB)

Leave a Comment