Rohde & Schwarz RT-ZH11 Operation Manual (PDF)

The manual for the R&S® RT-ZH11 400 MHz Passive High-Voltage Probe provides detailed instructions on setup, operation, and troubleshooting, including safety precautions, electrical specifications, and measurement categories. It emphasizes the importance of proper grounding, connection procedures, and compliance with voltage and frequency ratings to ensure safe and effective use of the probe.

  • Brand: Rohde & Schwarz
  • Model: RT-ZH11
  • Type: operation manual
  • File size: 764.4 KB

Manual Overview

The operation manual for the R&S RT-ZH11 400 MHz Passive High-Voltage Probe focuses on safety, specifications, and usage guidelines. For troubleshooting, ensure that the probe and connected instruments are properly grounded and that the probe is not used beyond its specified limits. The manual emphasizes the importance of adhering to the voltage versus frequency derating curve and avoiding operation in wet or explosive environments. Error diagnostics are not explicitly detailed, but the manual advises against using the probe with suspected failures and recommends consulting qualified service personnel for repairs. Calibration and adjustments involve ensuring the probe’s compensation range is between 5 pF and 20 pF. The manual provides detailed specifications, including an attenuation ratio of 1000:1, a system bandwidth of 400 MHz, and input resistance of 50 MΩ. It also outlines the maximum rated input voltages for different measurement categories, with specific emphasis on transient overvoltage ratings. The probe is designed for indoor use only and should be operated by qualified personnel to prevent injury and equipment damage.

Quick Issues Covered

  • Diagnose probe input overvoltage using voltage derating curve.
  • Adjust compensation range for accurate signal measurement.
  • Trace circuit issues with detailed probe schematics.

Overview

The product is a 400 MHz Passive High-Voltage Probe, model R&S® RT-ZH11, manufactured by Rohde & Schwarz. The manual covers safety information, electrical specifications, measurement categories, pollution degrees, and mechanical characteristics. It includes details on the probe’s attenuation ratio, voltage coefficient, system bandwidth, input resistance and capacitance, maximum rated input voltage, and compensation range. The manual also provides guidance on safe usage, including connection procedures and operating conditions.

Specifications

  • Attenuation Ratio: 1000:1 +2% at DC (warranted)
  • Voltage Coefficient: 0.0005 %/V
  • System Bandwidth: 400 MHz (-3 dB)
  • Probe Risetime: 900 ps (10 % – 90 %)
  • Input Resistance (System): 50 MΩ +1% (warranted)
  • Input Capacitance (System): 7.5 pF
  • Maximum Rated Input Voltage:
  • Measurement category I: 1000 V root mean square, 4000 V transient overvoltage
  • Measurement category II: 1000 V root mean square CAT II
  • Compensation Range: 5 pF – 20 pF
  • Input Coupling of the Measuring Instrument: 1 MΩ AC/DC
  • Pollution Degree: 2

Safety & Warnings

To avoid personal injury and to prevent fire or damage to the product or connected products, comply with the following safety precautions:

– Only qualified personnel should use the probe assembly.
– Use only grounded instruments.
– Do not connect the probe ground lead to a potential other than earth ground. Ensure the probe and measurement instrument are properly grounded.
– Connect the probe output to the measurement instrument and the ground lead to earth ground before connecting the probe to the circuit under test. Disconnect the probe input and ground lead from the circuit under test before disconnecting the probe from the measurement instrument.
– Observe probe and probe accessory ratings. Do not exceed the maximum ratings of the probe or connected accessories.
– Comply with the voltage versus frequency derating curve.
– Keep away from live circuits and avoid open circuitry. Do not touch connections or components when power is present.
– Do not operate with suspected failures. Refer to qualified service personnel.
– Indoor use only. Do not operate in wet/damp environments. Keep product surfaces dry and clean.
– Do not operate the product in an explosive atmosphere.

Download PDF (764.4 KB)

Leave a Comment