Rohde & Schwarz HZO50 Operation Manual (PDF)

The manual for the HZ050 AC/DC Current Probe covers instructions for setup, operation, and troubleshooting, including how to power on the device, perform zero adjustment, and conduct current measurements. It also provides safety guidelines, maintenance tips, and details on battery replacement to ensure proper functioning and user safety.

  • Brand: Rohde & Schwarz
  • Model: HZO50
  • Type: operation manual
  • File size: 1.0 MB

Manual Overview

The HZ050 AC/DC Current Probe is designed for precise, non-contact measurement of AC and DC currents, utilizing Hall effect technology. It measures currents from 5mA to 30A with a resolution of 1mA across a frequency range from DC to 100 kHz. The probe is suitable for applications involving inverters, switched-mode power supplies, and industrial controls. For troubleshooting, the manual emphasizes safety precautions, such as ensuring the probe is not used if damaged and keeping fingers behind the safety barrier. The probe features a green LED that indicates power status; it blinks when the battery is low. Calibration involves a zero adjustment button to counteract thermal drift and environmental changes. For measurements, the probe must be connected to an oscilloscope or multimeter, and the jaws should fully enclose the conductor. The probe automatically powers off to conserve battery life. It operates safely under specific conditions, including indoor use, temperatures from 0°C to 50°C, and altitudes up to 2000 meters.

Quick Issues Covered

  • Diagnose power-up failures with LED status indicators.
  • Calibrate null offset using the Nullabgleich button.
  • Trace circuit schematics with detailed output sensitivity data.

Overview

The HZ050 AC/DC Current Probe by HAMEL, a Rohde & Schwarz Company, is designed for precise, non-contact measurement of AC and DC currents, as well as complex current waveforms. Utilizing the latest Hall effect technology, it measures currents from 5mA to 30A with a resolution of 1mA over a frequency range from DC to 100 kHz. This makes it suitable for applications such as inverters, switched-mode power supplies, and industrial controls. The manual covers safety instructions, technical specifications, operation and handling, including turning on the device, zero adjustment, current measurement, automatic shutdown, battery replacement, and maintenance.

Specifications

  • Nennstrom In 20 ACeff oder DC
  • Messbereich 0 bis +30A
  • Uberstromfahigkeit 500A
  • Allg. DC-Genauigkeit +1% v. Mw. £2 mA
  • Auflosung +1 mA
  • Rauschen [typ.] 200 UV eff.
  • Verstarkungsdrift +0,01% v. Mw./°C
  • Ausgangsempfindlichkeit 100 mV/A
  • Frequenzbereich DC bis 100 kHz (0,5 dB)
  • di/dt-Antwort 20 A/us
  • Ansprechzeit <1us
  • Betriebsspannung 300 V ACeff oder DC
  • Betriebstemperatur 0°C bis +50°C
  • Lagertemperatur bei entfernter Batterie -20°C bis +85°C
  • Stromversorgung 9 V Alkaline Batterie PP3, MN 1604 oder IEC6LR61
  • Batterielebensdauer 30 Stunden [typisch]
  • Minimale Last >100 kO und <100 pF
  • LeitergroBe 25 mm Durchmesser
  • Gewicht 320 g
  • Ausgangsanschlusse 2 m-Koaxialkabel mit Sicherheits-BNC-Stecker (50 Ohm)

Controls & Indicators

The front-panel controls and indicators of the HZ050 AC/DC Current Probe include the following:

1. Jaws
2. Conventional current direction indicator
3. Safety barrier
4. Battery compartment cover
5. Battery compartment screw
6. Opening lever
7. ON/OFF switch
8. Zero adjustment button
9. LED indicator

Installation / Setup

The installation and setup of the HZ050 AC/DC Current Probe involve several important considerations:

1. Safety Precautions: The probe should only be operated by qualified personnel. It is crucial to avoid electric shock by ensuring the probe is not damaged and is used as per the operating instructions. The probe must be connected to the display device before being installed around the conductor. Personal protective equipment should be used where hazardous live conductors are exposed.

2. Environmental Conditions: The probe is designed for indoor use at altitudes up to 2000 meters, within a temperature range of 0°C to +50°C, and a maximum relative humidity of 80% at 31°C, decreasing linearly to 40% at 50°C.

3. Electrical Specifications: The probe can measure currents from 5mA to 30A with a resolution of 1mA and is suitable for frequencies from DC to 100 kHz. It operates with a 9V alkaline battery and has a typical battery life of 30 hours.

4. Physical Setup: The probe has a jaw opening for conductors up to 25 mm in diameter and connects via a 2-meter coaxial cable with a safety BNC connector.

5. Calibration: The null offset can be adjusted using the null button to account for thermal drift and environmental changes. This should be done without the probe being around a live conductor.

6. Operation: To measure current, turn on the probe, connect it to a measuring device, perform a null offset adjustment, and then clamp it around the conductor ensuring the jaws close properly. The direction of current flow is indicated by arrows on the probe.

7. Automatic Shut-off: The probe automatically turns off to conserve battery life.

These highlights ensure safe and accurate use of the HZ050 Current Probe.

Operation

To operate the HZ050 AC/DC Current Probe, follow these basic steps:

1. Turn on the current probe. A green LED will light up. If the battery voltage is too low for normal operation, the LED will blink, indicating that the battery needs replacement.

2. Perform a zero adjustment to account for any offset voltage due to thermal drift or environmental conditions. Press the zero adjustment button to set the output voltage to zero. Ensure the probe is not around a current-carrying conductor during this adjustment.

3. For current measurement:
– Turn on the current probe and check the LED is lit.
– Connect the output cable to an oscilloscope, multimeter, or other measuring device.
– Press the zero adjustment button to offset the adjustment.
– Enclose the conductor with the jaws of the current probe, ensuring the jaws close properly.
– Observe and conduct the desired current measurements. A positive display value indicates current flowing in the direction of the arrows on the probe.

4. The probe will automatically turn off after a period of inactivity to conserve battery life.

Safety & Warnings

The safety warnings and precautions explicitly present in the manual for the HZ050 AC/DC Current Probe include:

1. The current probe should only be operated by qualified personnel to avoid injuries.
2. To prevent electric shock during installation and use, exercise caution as dangerous voltages and currents may be present in the circuit under test.
3. Do not use the product if it is damaged.
4. Always connect the probe to the display device before installing it around the conductor.
5. Ensure the probe is disconnected from all live electrical circuits and the test leads are separated before removing the battery cover.
6. Use the current probe only as specified in the operating instructions to ensure user protection by the probe’s safety features.
7. Comply with local and national safety regulations. Personal protective equipment should be used where hazardous live conductors are exposed to prevent injury from electric shock and arc flash.
8. Do not hold the probe in front of the safety barrier.
9. Inspect the current probe before each use for damage. Check the housing and output cable insulation for cracks or missing plastic, and look for loose or worn components. Pay special attention to the insulation in the jaw area.
10. Exercise caution when working with voltages over 60 V DC or 30 V AC RMS or 42 V AC peak, as such voltages pose a risk of electric shock.
11. This equipment is designed to provide protection against impulse disturbances in fixed installations, such as distribution panels, feeders, and short branch circuits, as well as lighting systems in large buildings.
12. Using the device in a manner not specified in the manual may impair the device’s self-protection.
13. The equipment is designed to be safely operated under the following conditions: indoor use, up to 2000 meters above sea level, temperature range from 0°C to +50°C, and maximum relative humidity of 80% up to 31°C decreasing linearly to 40% at 50°C.
14. The use of the current probe on non-insulated conductors is limited to 300 V AC RMS or DC at specified frequencies.
15. The user is responsible for safe use and must be a qualified or authorized person. Ensure fingers are behind the safety barrier when using the current probe.
16. Always inspect the current probe and cable for damage before use.
17. To avoid electric shock, keep the current probe clean and free from surface contamination.

Download PDF (1.0 MB)

Leave a Comment