The manual for the Agilent Technologies E8285A CDMA Mobile Station Test Set provides detailed instructions for setup, operation, and troubleshooting, emphasizing safety precautions and the importance of proper grounding to prevent electrical hazards. It also outlines the warranty terms, stating that the hardware and software are covered against defects for one year, with options for repair, replacement, or refund if issues arise.
Manual Overview
The Agilent E8285A CDMA Mobile Station Test Set Reference Guide provides detailed instructions for troubleshooting, error diagnostics, calibration, and board-level adjustments. The manual emphasizes the importance of understanding safety warnings and symbols to prevent personal injury and equipment damage. Troubleshooting involves identifying error codes and performing diagnostics to isolate issues. Calibration procedures are outlined to ensure accurate measurements, with specific adjustments detailed for maintaining instrument precision. The guide advises that all servicing should be performed by qualified personnel, as the removal of covers can expose hazardous voltages. It stresses the need for a continuous safety earth ground connection and the use of the supplied three-prong AC power cord to prevent electrical shock. The manual also includes guidelines for replacing fuses and cleaning the instrument. It is crucial to follow these instructions to maintain the equipment’s safety and operational integrity.
Quick Issues Covered
- Diagnose power-up failures with detailed troubleshooting steps.
- Interpret error codes for efficient problem resolution.
- Access schematics for circuit tracing and fault isolation.
Overview
Refer to the PDF for details.
Specifications
Refer to the PDF for details.
Controls & Indicators
Refer to the PDF for details.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
The manual includes several safety warnings and precautions:
1. Familiarize yourself with safety markings and instructions before operating the product.
2. Ensure an uninterruptible safety earth ground from the main power source to the product.
3. Connect the rear-panel chassis ground terminal to earth ground when using a DC power source to prevent shock hazards.
4. The product is a Safety Class I instrument and must be connected to a socket with a protective earth contact.
5. Do not interrupt the protective conductor inside or outside the product.
6. If protection is impaired, make the instrument inoperative and secure it against unintended operation.
7. If using an autotransformer for voltage reduction, ensure the common terminal is connected to the earth terminal.
8. Use the product only as specified to maintain protection.
9. There are no operator serviceable parts; refer servicing to qualified personnel.
10. Do not remove covers to prevent electrical shock.
11. Disconnect the product from all voltage sources before opening it.
12. Adjustments are performed with power supplied and protective covers removed, which can result in personal injury if contacted.
13. Internal capacitors may remain live for 5 seconds after disconnecting the power cord.
14. Replace line fuses only with 250 V fuses of the same current rating and type.
15. Use the supplied three-prong AC power cord to ensure adequate earth grounding.
16. The product is for indoor use only and is designed for Installation Category II and Pollution Degree 2.
17. Ensure supply voltage is within the specified range due to autoranging line voltage input.
18. Disconnect from mains before cleaning; use a dry or slightly dampened cloth for external parts.
19. Ensure proper ventilation when installing in a cabinet; use forced convection if power dissipation exceeds 800 watts.
Download REFERENCE Manual (PDF – 5.2 MB)
HP-e8285a Reference Manual PDF (5.2 MB): Assists technicians with troubleshooting and calibration procedures for the HP-e8285a model.
- Brand: Hp-e8285a
- Model: REFERENCE
- Type: Manual
- File size: 5.2 MB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download REFERENCE manual (PDF)