Overview
Refer to the PDF for details.
Specifications
Refer to the PDF for details.
Controls & Indicators
OFF-ON-VOL: To turn the monitor on, rotate this knob clockwise. Power is turned off with a counterclockwise rotation.
BRIGHTNESS: This control is used to adjust the display if it is not bright enough or if it is too bright.
CONTRAST: This control allows adjustment of the contrast between the green phosphor image and the background.
EH HOLD: If the picture tears toward the left or right, or appears as diagonal stripes across the screen, the horizontal hold should be rotated clockwise or counterclockwise until the picture stabilizes.
V HOLD: If the picture rolls upward or downward, the vertical hold should be rotated clockwise or counterclockwise until the picture stabilizes.
75-OHM TERMINATION SWITCH: This switch should be set to 75Ω when connected to equipment which has 75-ohm output impedance. The switch should be set to HIGH when connected to a higher output impedance or when using multiple monitors.
VIDEO-IN and VIDEO-OUT Connectors: These connectors provide feed through of a video signal when it is desirable to display the video signal on more than one monitor. The composite video signal applied to the VIDEO-IN connector will also appear at the VIDEO-OUT connector.
AUDIO-IN and AUDIO-OUT Connectors: When applicable, the audio signal from a computer should be fed to the AUDIO-IN connector using a shielded cable.
Installation / Setup
Refer to the PDF for details.
Operation
Refer to the PDF for details.
Troubleshooting & Error Codes
Refer to the PDF for details.
Safety & Warnings
Refer to the PDF for details.
Download INSTRUCTION Manual (PDF – 603.0 KB)
HP-82912A-82913A Instruction Manual PDF (603.0 KB): Provides technicians with detailed steps for troubleshooting and calibration.
- Brand: Hp-82912a-82913a
- Model: INSTRUCTION
- Type: Manual
- File size: 603.0 KB
Overview
Brief overview of the product.
Specifications
- Key spec 1
- Key spec 2
Controls & Indicators
Control panel/button layout.
Installation / Setup
- Step 1…
- Step 2…
Operation
Basic usage, modes, cycles.
Troubleshooting & Error Codes
| Issue / Code | Fix |
|---|---|
| Example | How to fix… |
Safety & Warnings
- Important warning…
Downloads
Download INSTRUCTION manual (PDF)