Hp-16700-series-module-install GUIDE – Manual (PDF)

  • Brand: Hp-16700-series-module-install
  • Model: GUIDE
  • Type: manual
  • File size: 7.2 MB

Overview

Refer to the PDF for details.

Specifications

Refer to the PDF for details.

Controls & Indicators

Refer to the PDF for details.

Installation / Setup

The setup highlights for the HP 16600A, HP 16700A, and HP 16702A include:

1. Wiring and Connections:
– Power cables and monitor cables are essential for setup.
– The CD-ROM drive is required for software updates or installation.
– External disk drives and printers require appropriate cables.

2. Clearances:
– A minimum of 5 cm spacing between instruments is necessary for proper cooling.

3. Calibration and Configuration:
– Monitor resolution for optional monitors is pre-configured at the factory for 1280 x 1024. If using a different monitor, configuration is required.
– For the HP 16702A, the monitor configuration involves pressing the TAB key multiple times to cycle through choices, then pressing ENTER to select and “Y” to confirm.

4. Prerequisites:
– The system mouse and keyboard must be installed for the HP 16600A series and HP 16700A to boot up properly. The HP 16702A requires only a mouse.
– The CD-ROM drive address should be set to 2 to avoid damage to the hard drive.

5. Networking:
– Network setup involves configuring IP addresses, gateway names, and subnet masks through the System Administration Tools.

These steps ensure the proper installation and operation of the logic analysis systems.

Operation

Refer to the PDF for details.

Troubleshooting & Error Codes

Refer to the PDF for details.

Safety & Warnings

Refer to the PDF for details.

Download GUIDE Manual (PDF – 7.2 MB)

HP 16700 Series Module Install Guide PDF (7.2 MB): Provides step-by-step instructions for installing modules in HP 16700 series devices.

  • Brand: Hp-16700-series-module-install
  • Model: GUIDE
  • Type: Manual
  • File size: 7.2 MB

Overview

Brief overview of the product.

Specifications

  • Key spec 1
  • Key spec 2

Controls & Indicators

Control panel/button layout.

Installation / Setup

  1. Step 1…
  2. Step 2…

Operation

Basic usage, modes, cycles.

Troubleshooting & Error Codes

Issue / CodeFix
ExampleHow to fix…

Safety & Warnings

  • Important warning…

Downloads

Download GUIDE manual (PDF)

Leave a Comment